Dr Sumsun Naher • City St George's, University of London

Contact details

About
Publications
Professional activities

About

Overview

Dr Sumsun Naher is currently working as a Reader in the Department of Engineering at City, University of London. She graduated with a PhD from Dublin City University, Dublin, Ireland where she then took up a Lecturing position in the School of Mechanical and Manufacturing Engineering. Her research lies in the area of semi-solid processing, laser processing, simulation and modelling of materials processing technologies and materials characterisation.

She has edited five books, co-authored thirteen book chapters and written more than 100 international journal and conference papers. She received DCU Invent Commercialisation Award, 2011, for her innovation and commercialisation of laser peening process for the application of rock drilling hammer. To date she has supervised to completion nine PhD students and seven post-doctoral researchers. She is an active reviewer of many national and international funding bodies including European Science Foundation and European Commission and also an external PhD examiner for European and Asian Institutes.

Dr. Naher is an organizing committee member of many International Conferences and a Chartered Member of IMechE, UK and Fellow of of IMechE, UK, Fellow of Institute of Materials, Minerals & Mining, UK; Fellow of Advance Higher Education Authority, UK. She is an elected Board of Directors for the European Association of Materials Forming. She is the co-organiser of the ESAFORM Conference and well as co-organiser of the Co- organisers of Mini-symposium for Additive Manufacturing ESAFORM conference since 2017.

She was a main participant and management committee member in an EU COST Action Thixosteel project.

Membership of professional bodies

2012 - 2015 EU COST Action MP1103, Nanostructured materials for solid-state hydrogen storage, Management Committee Member

2012 Engineers Ireland, Chartered Engineer, CEng, MIEI

2011 - 2015 EU COST Action MP1004, Hybrid Energy Storage Devices & Systems for Mobile & Stationary Applications, Management Committee Member

2007 - 2010 EU Cost Action 541 Thixoforming of Steel, Management Committee Member

2006 Mechanical Engineering Community of Practice, National Digital & Learning Respiratory (NDLR), Member

2005 Engineers Ireland, Member, MIEI

2005 Mechanical & Manufacturing division of Engineers Ireland & IMechE, UK, RoI branch, Member

Qualifications

PhD, School of Mechanical & Manufacturing Engineering, Dublin City University, Ireland
MSc Engineering, Department of Materials & Metallurgical Engineering, Bangladesh University of Engineering and Technology, Bangladesh
BSc Engineering, Department of Materials & Metallurgical Engineering, Bangladesh University of Engineering and Technology, Bangladesh
Post Graduate Diploma in Academic Practice, City, University of London, United Kingdom

Employment

Reader, City, University of London, United Kingdom, August 2024 - present
Senior Lecturer, City, University of London, United Kingdom, May 2013 - August 2024
Research Development Officer, Dublin City University, Ireland, 2009 - 2013
Lecturer, Dublin City University, Ireland, 2006 - 2009
Scientific Officer, Bangladesh Council of Scientific & Industrial Research, Bangladesh, 1998 - 2000

Visiting appointments

Visiting Academic, University of Malaya

Teaching

- Materials & Manufacturing
- Strength of Materials
- Advanced Materials and Manufacturing Processes
- Professional & Personal Development for Engineers

Publications

Publications by category

Books (5)

(2017). Preface: 20th International ESAFORM Conference on Material Forming. Author(s).
Naher, S., Hashmi, M.S.J. and Mridha, S. (Eds.), (2011). Advances in Materials and Processing Technologies II, Selected papers from the Advances in Materials Processing Technologies Conference 2009. Trans Tech Publisher. ISBN 9783037850534.
Naher, S., Hashmi, M.S.J. and Ylibas, B.S. (Eds.), (2010). Advances in Materials Processing and Technologies, Advanced Materials Research, Selected papers from the Advances in Materials Processing Technologies Conference 2008. Trans Tech Publisher. ISBN 9780878492978.
Olabi, A.G., Acquaviva, M. and Naher, S. (Eds.), (2009). Environmental Protection Beyond 2020: Proceedings of the 3rd International Conference on Sustainable Energy & Environmental Protection - Part 1. Glasnevin Publishing. ISBN 9780955578137.
Naher, S., Olabi, A.G. and Dassisti, M. (Eds.), (2009). Sustainable Energy Beyond 2020: Proceedings of the 3rd International Conference on Sustainable Energy & Environmental Protection - Part 2. Glasnevin Publishing. ISBN 9780955578120.

Chapters (17)

Aqida, S.N., Shah, L.H., Naher, S. and Brabazon, D. (2024). Rapid solidification processing and bulk metallic glass casting. Comprehensive Materials Processing (pp. 2-23). Elsevier. ISBN 9780323960212.
Mahmoud, M., Ramadan, M., Pullen, K., Abdelkareem, M.A., Wilberforce, T., Olabi, A.-.G.... Naher, S. (2022). Waste Heat Recovery Applications Incorporating Phase Change Materials. Encyclopedia of Smart Materials (pp. 513-521). Elsevier. ISBN 9780128157336.
Mahmoud, M., Ramadan, M., Naher, S., Pullen, K., Abdelkareem, M.A., Baroutaji, A.... Olabi, A.-.G. (2022). Investigation on the Use of Phase Change Materials in Geothermal Energy Applications. Encyclopedia of Smart Materials (pp. 352-361). Elsevier. ISBN 9780128157336.
Mahmoud, M., Ramadan, M., Pullen, K., Abdelkareem, M.A., Alami, A.H., Olabi, A.-.G.... Naher, S. (2022). Foam-Based Composite Phase Change Materials. Encyclopedia of Smart Materials (pp. 343-351). Elsevier. ISBN 9780128157336.
Mahmoud, M., Ramadan, M., Pullen, K., Abdelkareem, M.A., Baroutaji, A., Olabi, A.-.G.... Naher, S. (2022). Advances in Shape-Stabilized Phase Change Materials. Encyclopedia of Smart Materials (pp. 326-333). Elsevier. ISBN 9780128157336.
Dasari, B. and Naher, S. (2022). Graphene Materials for Batteries. Encyclopedia of Smart Materials (pp. 69-84). Elsevier. ISBN 9780128157336.
Mahmoud, M., Ramadan, M., Pullen, K., Abdelkareem, M.A., Alami, A.H., Olabi, A.-.G.... Naher, S. (2022). Using Nanoparticles for Thermal Enhancement of Phase Change Materials. Encyclopedia of Smart Materials (pp. 281-287). Elsevier. ISBN 9780128157336.
Mahmoud, M., Pullen, K., Ramadan, M., Baroutaji, A., Abdelkareem, M.A., Olabi, A.-.G.... Naher, S. (2022). Phase Change Materials Integrated Into Solar Parabolic Collectors. Encyclopedia of Smart Materials (pp. 613-620). Elsevier. ISBN 9780128157336.
Kabir, I.R. and Naher, S. (2021). Modelling of laser micro-processing techniques. Laser Micro- and Nano-Scale Processing IOP Publishing.
Mahmoud, M., Ramadan, M., Naher, S., Pullen, K. and Olabi, A.-.G. (2021). Advances in Grout Materials in Borehole Heat Exchangers. Reference Module in Materials Science and Materials Engineering Elsevier. ISBN 9780128035818.
Ahmad, A.H., Naher, S., Aqida, S.N. and Brabazon, D. (2014). Routes to Spheroidal Starting Material for Semisolid Metal Processing. Comprehensive Materials Processing Thirteen Volume Set (pp. V5-V5-148).
Aqida, S.N., Shah, L.H., Naher, S. and Brabazon, D. (2014). Rapid Solidification Processing and Bulk Metallic Glass Casting. Comprehensive Materials Processing Thirteen Volume Set (pp. V5-V5-88).
Kapranos, P., Brabazon, D., Midson, S.P., Naher, S. and Haga, T. (2014). Advanced Casting Methodologies: Inert Environment Vacuum Casting and Solidification, Die Casting, Compocasting, and Roll Casting. Comprehensive Materials Processing Thirteen Volume Set (pp. V5-V5-37).
Aqida, S.N., Shah, L.H., Naher, S. and Brabazon, D. (2014). Rapid Solidification Processing and Bulk Metallic Glass Casting. Comprehensive Materials Processing (pp. 69-88). Elsevier. ISBN 9780080965338.
Ahmad, A.H., Naher, S., Aqida, S.N. and Brabazon, D. (2014). Routes to Spheroidal Starting Material for Semisolid Metal Processing. Comprehensive Materials Processing (pp. 135-148). Elsevier. ISBN 9780080965338.
Kapranos, P., Brabazon, D., Midson, S.P., Naher, S. and Haga, T. (2014). Advanced Casting Methodologies. Comprehensive Materials Processing (pp. 3-37). Elsevier. ISBN 9780080965338.
Naher, S., Brabazon, D., Münstermann, P., Immich, P., Rassili, A., Fischer, D.... Klemm, H. (2010). Die Development. In Atkinson, H.V. and Rassili, A. (Eds.), Thixoforming Steel (pp. 105-140). Shaker Verlag. ISBN 9783832291334.

Conference papers and proceedings (42)

Qaban, A. and Naher, S. Investigation of corrosion resistance of high-strength low-alloy (HSLA) steel in fresh and salt water for pipeline application. INTERNATIONAL CONFERENCE ON KEY ENABLING TECHNOLOGIES (KEYTECH 2019).doi:10.1063/1.5123708
Nouri, J.M., Dasari, B.L., Brabazon, D. and Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. Material Forming 26-28 April, Dublin, Ireland.
Kabir, I.R., Yin, D. and Naher, S. Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming.doi:10.1063/1.4963512
Laksmi, B., Nouri, J.M., Brabazon, D. and Naher, S. (2015). Prediction of properties for the production and application of graphene reinforced metal matrix composites. 8th International Conference on Sustainable Energy & Environmental Protection (SEEP 2015) 11-14 August, University of the West of Scotland, Paisley.
Naher, S., Ahmad, A.H. and Brabazon, D. (2013). Direct thermal method of aluminium 7075. 16th International Conference on Advances in Materials & Processing Technologies 22-26 September, Taipei, Taiwan.
Naher, S., Ahmad, A.H. and Brabazon, D. (2013). Pouring Temperature Effects On Mechanical Properties of As-Cast Aluminium A356. 16th Annual Conference on Materials Forming ESAFORM 22-24 April, Aveiro, Portugal.
Naher, S. and Brabazon, D. (2012). Investigation of Semi-Solid Metal Processing Route. 15th International Conference on Advances in Materials & Processing Technologies (AMPT) 23 September 2012-25 September 2013, Wollongong, Australia.
Naher, S., McMorrow, D. and Brabazon, D. (2012). Guide to implementation of structured engineering PhD programmes - an Irish perspective. 4th International Symposium for Engineering Education 18-20 July, Sheffield.
Naher, S., Tamtam, A., Olabi, A.G. and Gallagher, F. (2011). Quality Assurance in Irish Higher Education as a Sample. Towards Harnessing Quality in Education and Research: Challenges and Opportunities, 3rd Annual Conference of the Arab Organization for quality Assurance in Education 16-17 June, Cardiff.
Naher, S., Chikarakara, E., Betts, A. and Brabazon, D. (2011). Effects of High Speed Laser Surface Modification on Microstructure and Corrosion Characteristics of Ti-6Al-4V. June-, Sweden.
Chikarakara, E., Punset, M., Picas, J.A., Brabazon, D., Naher, S. and Menary, G. (2011). Characterisation of Laser Modified WC-CoCr Coatings. 14th International Conference on Material Forming ESAFORM 27-29 April, Queens Univ, Belfast, Northern Ireland.doi:10.1063/1.3589661
Aqida, S.N., Naher, S., Brabazon, D. and Menary, G. (2011). Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes. 14th International Conference on Material Forming ESAFORM 27-29 April, Queens Univ, Belfast, Northern Ireland.doi:10.1063/1.3589660
Naher, S., Chikarakara, E., Punset, M., Picas, J.A. and Brabazon, D. (2011). Characterisation of Laser Modified WC-CoCr Coatings. The 14th International ESAFORM Conference on Material Forming 27-29 April, Belfast, UK.doi:10.1063/1.3589661
Naher, S., Aqida, S.N. and Brabazon, D. (2011). Laser Surface Modification of H13 Die Steel using different Laser Spot Sizes. The 14th International ESAFORM Conference on Material Forming: ESAFORM 2011 27-29 April, University Belfast, Northern Ireland, UK.doi:10.1063/1.3589660
Naher, S., Chastel, Y., Chinesta, F., El Mansori, M. and Chinesta, F. (2010). Designing Pulse Laser Surface Modification of H13 Steel using Response Surface Method. International Conference on Advances in Materials and Processing Technologies 24-27 October, Paris, France.doi:10.1063/1.3552376
Naher, S., Brabazon, D., Karazi, S. and Murphy, G. (2010). Analysis of international graduate programme structures for engineering education. 3rd International Symposium for Engineering Education 30 June-2 July, University College Cork, Ireland.
Naher, S., McMorrow, D. and Brabazon, D. (2010). Employer and student perspectives on skills for engineers in the twenty first century and beyond. 3rd International Symposium for Engineering Education 30 June-2 July, University College Cork, Ireland.
Naher, S., Tamtam, A., Olabi, A.G. and Gallagher, F. (2010). Implementing English Medium Instruction (EMI) for Engineering Education in Arab world and Twenty First Century Challenges. 3rd International Symposium for Engineering Education 30 June-2 July, University College Cork, Ireland.
Naher, S., Aqida, S.N. and Brabazon, D. (2010). Laser Surface Modification of Die Steels. UK-Malaysia- Ireland Engineering Science Conference 23-25 June, Belfast, Northern Ireland.
Naher, S., Chikarakara, E., Aqida, S.N., Brabazon, D., Picas, J.A., Punset, M.... Forn, A. (2010). Surface Modification of HVOF Thermal Sprayed WC-CoCr Coatings by Laser Treatment. 13th International ESAFORM Conference on Material Forming 7-9 April, University of Brescia, Italy.
Naher, S., Aqida, S.N., Calosso, F., Brabazon, D. and Rosso, M. (2010). Thermal fatigue properties of laser treated steels at semi-solid processing temperature. 13th International ESAFORM Conference on Material Forming 7-10 April, University of Brescia, Brescia, Italy.
Chikarakara, E., Naher, S., Brabazon, D., Hashmi, M.S.J., Mridha, S. and Naher, S. (2009). Analysis of Microstructural Changes during Pulsed CO2 Laser Surface Processing of AISI 316L Stainless Steel. International Conference on Advances in Materials and Processing Technologies (AMPT) 26-29 October, Kuala Lumpur, MALAYSIA.doi:10.4028/www.scientific.net/AMR.264-265.1401
Naher, S., Aqida, S.N. and Brabazon, D. (2009). Effect of laser parameters on temperature distribution of glazed die steel. International Conference on Advances in Materials and Processing Technologies 26-29 October, Malaysia.
Naher, S., Derham, P. and Brabarzon, D. (2009). Development and production of vacuum forming moulds. International Conference on Advances in Materials and Processing Technologies 26-29 October, Kuala Lumpur, Malaysia.
Naher, S., Kovacs, Z., Aqida, S.N., Brabazon, D., Stratton, D. and Browne, D.J. (2009). Laser micro-channel inscription on Cu-Zr-based bulk metallic glass. WPI-INPG-Europe Workshop on Metallic Glass 25-28 August, Grenoble, France.
Naher, S., Syedahmad, S.A., Maurel, M. and Brabazon, D. (2009). Pulsed laser processing of H13 tool steel for semi-solid extrusion. The 12th International ESAFORM Conference on Material Forming, ESAFORM 2009 27-29 April, University of Twente, The Netherlands.
Naher, S., Aqida, S.N. and Brabazon, D. (2009). Thermal stability of glazed die material for semi-solid metal forming. 12th International European Scientific Association for Material Forming Conference 27-29 April, University of Twente, The Netherlands.
Naher, S. and Vickery, G. (2008). An investigation on the mixing of multiphase silicone for the production of breast prosthesis. International Conferences on Advances in Materials and Processing Technology 2-5 November, Kingdom of Bahrain.
Naher, S., Brabazon, D. and Biggs, P. (2008). Laser Surface Modification of Tool Steel for Semi-Solid Steel Forming. International Conference on semi-solid processing of alloys and composites 16-18 September, Aachen, Germany.
Naher, S., Brabazon, D. and Looney, L. (2008). Affects of student attendance on performance in undergraduate materials and manufacturing modules. International Symposium for Engineering Education 8-10 September, Dublin, Ireland.
Naher, S., Foley, G., Brabazon, D. and Freeland, B. (2008). Development of a heat transfer and artificial neural networks teaching laboratory practical for biotechnology students. 2nd International Symposium of Engineering Education 8-10 September, Dublin, Ireland.
Naher, S., Aqida, S.N., Maurel, M. and Brabazon, D. (2008). An overview of laser surface modification of die steels. 25th International Manufacturing Conference 3-5 September, Dublin, Ireland.
Naher, S., Brabazon, D. and Biggs, P. (2008). Glazing of tool dies for semi-solid steel forming. 11th ESAFORM 2008 conference on material forming 23-25 April, INSA Lyon, France.
Naher, S., Brabazon, D. and Looney, L. (2007). Investigation of factors affecting the learning of final year advanced materials and manufacturing students. International Symposium for Engineering Education 17-19 September.
Naher, S., Brabazon, D., Biggs, P. and Cassidy, O. (2007). Laser Surface Modification and Heat Treatment of Steels. Surface Engineering Symposium and exposition workshop 7 September-, Dublin, Ireland.
Naher, S., Brabazon, D. and Looney, L. (2003). A computational model for MMC's processing. International Conference on Advances in Materials and Processing Technologies 8-11 July, Dublin, Ireland.
Naher, S., Brabazon, D. and Looney, L. (2002). A computational two phase model for liquid and semi solid MMC's processing. 7th International Conference on the Semi-Solid Processing of Alloys and Composites 25-27 September, Tsukuba, Japan.
Naher, S., Brabazon, D. and Looney, L. (2001). Visual simulation of the stir casting process. International Conference on Advances in Materials and Processing Technologies 18-21 September, Madrid, Spain.
Naher, S. and Haseeb, A.S.M.A. (2000). Physical Chemical and Mineralogical Characteristics of Bangladesh Zircon. The MINPREX 2000 Conference 11-13 September, Melbourne, Australia.
Naher, S., Rahman, A. and Rashed, M. (1999). X-ray Diffraction and particle size distribution of bone ash from cattle bone. The 17th annual conference of Bangladesh Ceramic Society 16-17 April, Dhaka, Bangladesh.
Naher, S. (1997). Characterization of Bangladesh Zircon and its application in Steel Foundries. International Conference on Structure Processing & Properties of Materials 15 November-17 December, Bangladesh.
Ahmad, A.H., Naher, S. and Brabazon, D. Mechanical Properties of Thixoformed 7075 Feedstock Produced via the Direct Thermal Method. .doi:10.4028/www.scientific.net/kem.651-653.1569

Journal articles (99)

Tajudin, M.F.M., Ahmad, A.H., Alias, J., Maarof, M.R. and Naher, S. (2026). Application of Response Surface Methodology for Optimizing Direct Thermal Method Parameters of Al-Si Alloys with Mg Addition. Journal of Materials Engineering and Performance. doi:10.1007/s11665-026-13905-z
[publisher’s website]
Vijayananth, K., Pudhupalayam Muthukutti, G. and Naher, S. (2026). Enhancing hydrogen storage in Mg alloys: Role of alloying, reinforcements, and severe plastic deformation techniques. Next Materials, 11, pp. 101741-101741. doi:10.1016/j.nxmate.2026.101741
[publisher’s website]
Tajudin, M.F.M., Ahmad, A.H., Alias, J., Alang, N.A. and Naher, S. (2026). Microstructural Evolution of Al-Si Alloys with Varying Magnesium Content Prepared by Direct Thermal Method. Metallography, Microstructure, and Analysis. doi:10.1007/s13632-026-01328-0
[publisher’s website]
Youssef, H., Fabian, M., Khanafer, M., Naher, S., Grattan, K.T.V. and Sun, T. (2026). Machine Learning Models for Analyzing FBG Pressure Sensor Data in Monitoring Leak in Water Pipeline. IEEE Internet of Things Journal pp. 1-1. doi:10.1109/jiot.2026.3679428
[publisher’s website]
Girija, M., Sampath Kumar, T. and Naher, S. (2025). Synergistic Akermanite/PMMA/Zirconia Composites with Nature Inspired Structure via 3D Printing for orthopaedics. Journal of Materials Research and Technology, 39, pp. 5238-5250. doi:10.1016/j.jmrt.2025.10.152
[publisher’s website]
Alam, M.M., Islam, M.J., Naher, S., Grattan, K.T.V., Narjim, S. and Heffernan, C. (2025). Wastewater treatment using cellulose nanofiber (CNF)-based green filters: A sustainable approach to water purification. Carbohydrate Polymer Technologies and Applications, 10, pp. 100824-100824. doi:10.1016/j.carpta.2025.100824
[publisher’s website]
Mohamad Tajudin, M.F., Ahmad, A.H., Alias, J., Abd Razak, N.A. and Naher, S. (2025). Thermal Profile and Microstructure Analysis of Al-Si with the Magnesium Addition under Different Cooling Conditions. International Journal of Metalcasting, 19(3), pp. 1493-1506. doi:10.1007/s40962-024-01388-4
[publisher’s website]
Mohamad Tajudin, M.F., Ahmad, A.H., Alias, J., Alang, N.A. and Naher, S. (2024). Microstructure Characteristic of Aluminium 6061 Semi-Solid Feedstock Billet Produced with Direct Thermal Method. Journal of Advanced Research in Micro and Nano Engineering, 28(1), pp. 69-79. doi:10.37934/armne.28.1.6979
[publisher’s website]
Megalingam, A., Ahmad, A.H., Alang, N.A., Alias, J. and Naher, S. (2024). Creep Behaviour of Aluminium 7075 Feedstock Billet Globular Microstructure at High Processing Temperature. Journal of Failure Analysis and Prevention, 24(3), pp. 1324-1332. doi:10.1007/s11668-024-01917-7
[publisher’s website]
Mahmoud, M., Naher, S., Ramadan, M., Abdelkareem, M.A., Jaber, H. and Olabi, A.-.G. (2023). Investigation of a ground-cooled organic Rankine cycle for waste heat recovery. International Journal of Thermofluids, 18, pp. 100348-100348. doi:10.1016/j.ijft.2023.100348
[publisher’s website]
Bashir, M.N., Haseeb, A.S.M.A., Naher, S., Ali, M.M., Ali Bashir, M.B., Zaidi, A.A.... Javed, I. (2023). Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint. Journal of Materials Science: Materials in Electronics, 34(4). doi:10.1007/s10854-022-09465-2
[publisher’s website]
Nasir Bashir, M., Saad, H.M., Rizwan, M., Bingöl, S., Channa, I.A., Gul, M.... Naher, S. (2022). Effect of cobalt nanoparticles on mechanical properties of Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33(28), pp. 22573-22579. doi:10.1007/s10854-022-09035-6
[publisher’s website]
Bashir, M.N., Saad, H.M., Rizwan, M., Quazi, M.M., Ali, M.M., Ahmed, A.... Naher, S. (2022). Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33(28), pp. 22499-22507. doi:10.1007/s10854-022-09028-5
[publisher’s website]
Baig, J.A., Chandio, I.G., Kazi, T.G., Afridi, H.I., Akhtar, K., Junaid, M.... Malghani, N.A. (2022). Risk Assessment of Macronutrients and Minerals by Processed, Street, and Restaurant Traditional Pakistani Foods: a Case Study. Biological Trace Element Research. doi:10.1007/s12011-022-03429-7
[publisher’s website]
Arafat, M.M., Haseeb, A.S.M.A., Rozali, S., Brabazon, D., Rahman, B.M.A., Grattan, K.T.V.... Naher, S. (2022). Synthesis of ZnO and CuO Nanowires by Thermal Oxidation on Metallic Substrates. Key Engineering Materials, 926, pp. 1703-1712. doi:10.4028/p-qvfxm2
[publisher’s website]
Mahmoud, M., Alkhedher, M., Ramadan, M., Pullen, K., Olabi, A.-.G. and Naher, S. (2022). Experimental investigation into the potential of using a shallow ground-cooled condenser in Lebanon. Energy Conversion and Management, 264, pp. 115729-115729. doi:10.1016/j.enconman.2022.115729
[publisher’s website]
Mahmoud, M., Ramadan, M., Pullen, K., Abdelkareem, M.A., Olabi, A.G. and Naher, S. (2022). An Investigation on Nano-Enhanced Phase Change Materials: Carbon-Based Nanoparticles. Key Engineering Materials, 922, pp. 11-16. doi:10.4028/p-m17i9f
[publisher’s website]
Tamanna, N., Kabir, I.R. and Naher, S. (2022). Thermo-mechanical modelling to evaluate residual stress and material compatibility of laser cladding process depositing similar and dissimilar material on Ti6Al4V alloy. Thermal Science and Engineering Progress, 31, pp. 101283-101283. doi:10.1016/j.tsep.2022.101283
[publisher’s website]
Mahmoud, M., Alkhedher, M., Ramadan, M., Naher, S. and Pullen, K. (2022). An investigation on organic Rankine cycle incorporating a ground-cooled condenser: Working fluid selection and regeneration. Energy, 249, pp. 123742-123742. doi:10.1016/j.energy.2022.123742
[publisher’s website]
Kumar Bhoi, N., Singh, H., Pratap, S., Naher, S. and Jain, P.K. (2022). Zinc oxide nanorods effect in micro structural and mechanical characteristics of aluminium composite material. Materials Science and Engineering: B, 278, pp. 115641-115641. doi:10.1016/j.mseb.2022.115641
[publisher’s website]
Mahmoud, M., Ramadan, M., Naher, S., Pullen, K. and Olabi, A.-.G. (2021). CO2 – Based transcritical Rankine cycle coupled with a ground-cooled condenser. Thermal Science and Engineering Progress, 25, pp. 100948-100948. doi:10.1016/j.tsep.2021.100948
[publisher’s website]
Arafat, M.M., Dinan, B., Haseeb, A.S.M.A., Akbar, S.A., Rahman, B.M.A., Rozali, S.... Naher, S. (2021). Growth of 1D TiO2 nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32(47). doi:10.1088/1361-6528/ac1d77
[publisher’s website]
Abd Razak, N.A., Ahmad, A.H., Rashidi, M.M. and Naher, S. (2021). An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology, 114(3-4), pp. 1233-1240. doi:10.1007/s00170-021-06924-8
[publisher’s website]
Mahmoud, M., Ramadan, M., Pullen, K., Abdelkareem, M.A., Wilberforce, T., Olabi, A.-.G.... Naher, S. (2021). A review of grout materials in geothermal energy applications. International Journal of Thermofluids, 10, pp. 100070-100070. doi:10.1016/j.ijft.2021.100070
[publisher’s website]
Mahmoud, M., Ramadan, M., Naher, S., Pullen, K., Ali Abdelkareem, M. and Olabi, A.-.G. (2021). A review of geothermal energy-driven hydrogen production systems. Thermal Science and Engineering Progress, 22, pp. 100854-100854. doi:10.1016/j.tsep.2021.100854
[publisher’s website]
Mahmoud, M., Ramadan, M., Naher, S., Pullen, K. and Olabi, A.-.G. (2021). The impacts of different heating systems on the environment: A review. Science of The Total Environment, 766, pp. 142625-142625. doi:10.1016/j.scitotenv.2020.142625
[publisher’s website]
Qaban, A., Mohmed, T., Quazi, M.M. and Naher, S. (2020). The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 25, pp. 101362-101362. doi:10.1016/j.mtcomm.2020.101362
[publisher’s website]
Mahmoud, M., Ramadan, M., Naher, S., Pullen, K., Baroutaji, A. and Olabi, A.-.G. (2020). Recent advances in district energy systems: A review. Thermal Science and Engineering Progress, 20, pp. 100678-100678. doi:10.1016/j.tsep.2020.100678
[publisher’s website]
Mintz, B., Qaban, A. and Naher, S. (2020). Further insights on compositional control and heat treatment for improving the impact behaviour of hot-rolled steels containing Nb and Al. Materials & Design, 190, pp. 108601-108601. doi:10.1016/j.matdes.2020.108601
[publisher’s website]
Mahmoud, M., Ramadan, M., Olabi, A.-.G., Pullen, K. and Naher, S. (2020). A review of mechanical energy storage systems combined with wind and solar applications. Energy Conversion and Management, 210, pp. 112670-112670. doi:10.1016/j.enconman.2020.112670
[publisher’s website]
Mintz, B., Qaban, A., Bendke, P. and Naher, S. (2020). The influence of a high aluminium addition on the strength and impact behaviour of hot-rolled Nb containing steels. Materials Science and Technology, 36(2), pp. 233-244. doi:10.1080/02670836.2019.1701272
[publisher’s website]
Tamanna, N., Crouch, R. and Naher, S. (2019). Progress in numerical simulation of the laser cladding process. Optics and Lasers in Engineering, 122, pp. 151-163. doi:10.1016/j.optlaseng.2019.05.026
[publisher’s website]
Dasari, B.L., Brabazon, D. and Naher, S. (2019). Prediction of Mechanical Properties of Graphene Oxide Reinforced Aluminum Composites. Metals, 9(10), pp. 1077-1077. doi:10.3390/met9101077
[publisher’s website]
Tamanna, N., Rumana Kabir, I. and Naher, S. (2019). A numerical investigation of similar and dissimilar clad materials on H13 steel substrate in the Laser Cladding process. Advances in Materials and Processing Technologies, 5(4), pp. 598-606. doi:10.1080/2374068x.2019.1660558
[publisher’s website]
Liu, J., Silveira, J., Groarke, R., Parab, S., Singh, H., McCarthy, E.... Brabazon, D. (2019). Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12(1), pp. 79-87. doi:10.1007/s12289-018-1408-5
[publisher’s website]
Qaban, A. and Naher, S. (2019). Evaluation of Toughness of High Strength Low Alloy (HSLA) Steels as a Function of Carbon Content. International Journal of Mechanical and Production Engineering (IJMPE), 7(5), pp. 53-56
[publisher’s website]
Dasari, B.L., Morshed, M., Nouri, J.M., Brabazon, D. and Naher, S. (2018). Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145, pp. 136-144. doi:10.1016/j.compositesb.2018.03.022
[publisher’s website]
Kabir, I.R., Yin, D., Tamanna, N. and Naher, S. (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 124(3). doi:10.1007/s00339-018-1671-9
[publisher’s website]
Tamanna, N., Crouch, R., Kabir, I.R. and Naher, S. (2018). An analytical model to predict and minimize the residual stress of laser cladding process. Applied Physics A, 124(2). doi:10.1007/s00339-018-1585-6
[publisher’s website]
Qaban, A. and Naher, S. (2018). Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size. AIP Conference Proceedings, 1960, pp. 040017-040017. doi:10.1063/1.5034871
[publisher’s website]
Dasari, B.L., Nouri, J.M., Brabazon, D. and Naher, S. (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140, pp. 766-778. doi:10.1016/j.energy.2017.08.048
[publisher’s website]
Qaban, A., Mintz, B. and Naher, S. (2017). Hot rolled high Al containing steels as a replacement for the control rolled high strength low alloy (HSLA) steels. AIP Conference Proceedings, 1896, pp. 130007-130007. doi:10.1063/1.5008156
[publisher’s website]
Kabir, I.R., Yin, D. and Naher, S. (2017). 3D Thermal Model of Laser Surface Glazing for H13 Tool Steel. AIP Conference Proceedings, 1896. doi:10.1063/1.5008152
[publisher’s website]
Tamanna, N., Crouch, R. and Naher, S. (2017). A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process. AIP Conference Proceedings, 1896. doi:10.1063/1.5008041
[publisher’s website]
Kabir, I.R., Yin, D., Tamanna, N. and Naher, S. (2017). 3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy. Applied Sciences
[publisher’s website]
Qaban, A., Mintz, B., Kang, S.E. and Naher, S. (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi:10.1080/02670836.2017.1309097
[publisher’s website]
Yin, D., Wang, D., Li, W., Li, X., Zhang, H. and Naher, S. (2017). Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment. Journal of Materials Processing Technology, 247, pp. 29-39. doi:10.1016/j.jmatprotec.2017.03.033
[publisher’s website]
Dasari, B.L., Nouri, J.M., Brabazon, D. and Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1892, pp. 130006-130006. doi:10.1063/1.5008155
[publisher’s website]
Liu, J., Fernandez, B., Rodriguez, P., Naher, S. and Brabazon, D. (2016). Powder processing methodology for production of graphene oxide reinforced aluminium matrix composites. Advances in Materials and Processing Technologies, 2(4), pp. 437-450. doi:10.1080/2374068x.2016.1244389
[publisher’s website]
Liu, J., Khan, U., Coleman, J., Fernandez, B., Rodriguez, P., Naher, S.... Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi:10.1016/j.matdes.2016.01.031
[publisher’s website]
Zhu, Z., Chan, Y.-.C. and Wu, F. (2015). Effects of ZrO₂ nanoparticles on the mechanical properties of Sn₄₂Bi₅₈ solder joint. 2015 16TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY
Chikarakara, E., Fitzpatrick, P., Moore, E., Levingstone, T., Grehan, L., Higginbotham, C.... Brabazon, D. (2014). In vitrofibroblast and pre-osteoblastic cellular responses on laser surface modified Ti–6Al–4V. Biomedical Materials, 10(1), pp. 015007-015007. doi:10.1088/1748-6041/10/1/015007
[publisher’s website]
Lipowiecki, M., Ryvolová, M., Töttösi, Á., Kolmer, N., Naher, S., Brennan, S.A.... Brabazon, D. (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi:10.1002/jbm.a.35084
[publisher’s website]
Fazliana Fauzun, , S.N. Aqida, , S. Naher, , D. Brabazon, , F. Calosso, and M. Rosso, (2014). Effects of Thermal Fatigue on Laser Modified H13 Die Steel. Journal of Mechanical Engineering and Sciences, 6, pp. 975-980. doi:10.15282/jmes.6.2014.24.0094
[publisher’s website]
Ahmad, A.H., Naher, S. and Brabazon, D. (2014). Effects of Cooling Rates on Thermal Profiles and Microstructure of Aluminium 7075. International Journal of Automotive and Mechanical Engineering, 9, pp. 1685-1694. doi:10.15282/ijame.9.2013.18.0140
[publisher’s website]
Ahmad, A.H., Naher, S. and Brabazon, D. (2014). Injection Tests and Effect on Microstructure and Properties of Aluminium 7075 Direct Thermal Method Feedstock Billets. Key Engineering Materials, 611-612, pp. 1637-1644. doi:10.4028/www.scientific.net/kem.611-612.1637
[publisher’s website]
Naher, S. (2014). Direct Thermal Method of Aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi:10.4028/www.scientific.net/AMR.939.400
Chikarakara, E., Naher, S. and Brabazon, D. (2014). Spinodal decomposition in AISI 316L stainless steel via high-speed laser remelting. Applied Surface Science, 302, pp. 318-321. doi:10.1016/j.apsusc.2013.10.099
[publisher’s website]
Naher, S. (2014). The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminium Alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi:10.1080/10426914.2013.822980
Ahmad, A.H., Naher, S. and Brabazon, D. (2014). The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminum Alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi:10.1080/10426914.2013.822980
[publisher’s website]
Afridi, H., Kazi, T., Talpur, F., Naher, S. and Brabazon, D. (2014). Relationship between Toxic Metals Exposure via Cigarette Smoking and Rheumatoid Arthritis. Clinical Laboratory, 60(10/2014). doi:10.7754/clin.lab.2014.131117
[publisher’s website]
Afridi, H.I., Kazi, T.G., Talpur, F.N., Brabazon, D. and Naher, S. (2013). Estimation of toxic elements in the samples of different cigarettes and their impact on human health of Irish hypertensive consumers. Clinica Chimica Acta, 426, pp. 51-57. doi:10.1016/j.cca.2013.08.023
[publisher’s website]
Aqida, S.N., Brabazon, D. and Naher, S. (2013). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A Materials Science and Processing, 112(1), pp. 139-142. doi:10.1007/s00339-012-7214-x
[publisher’s website]
Aqida, S.N., Brabazon, D. and Naher, S. (2013). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 110(3), pp. 673-678. doi:10.1007/s00339-012-7149-2
[publisher’s website]
Afridi, H.I., Kazi, T.G., Brabazon, D., Naher, S. and Talpur, F.N. (2013). Comparative metal distribution in scalp hair of Pakistani and Irish referents and diabetes mellitus patients. Clin Chim Acta, 415, pp. 207-214. doi:10.1016/j.cca.2012.10.029
[publisher’s website]
Ahmad, A.H., Naher, S. and Brabazon, D. (2013). Thermal profiles and fraction solid of aluminium 7075 at different cooling rate conditons. Key Engineering Materials, 554-557, pp. 582-595. doi:10.4028/www.scientific.net/KEM.554-557.582
[publisher’s website]
Chikarakara, E., Naher, S. and Brabazon, D. (2013). Spinodal decomposition in AISI 316L stainless steel via high-speed laser remelting. Applied Surface Science
Afridi, H.I., Kazi, T.G., Brabazon, D. and Naher, S. (2012). Interaction between essential trace and toxic elements in the scalp hair samples of smokers and alcohol user diabetics. International Journal of Diabetes in Developing Countries, 32(3), pp. 151-162. doi:10.1007/s13410-012-0083-1
[publisher’s website]
Afridi, H.I., Kazi, T.G., Brabazon, D. and Naher, S. (2012). Interaction between zinc, cadmium, and lead in scalp hair samples of Pakistani and Irish smokers rheumatoid arthritis subjects in relation to controls. Biological Trace Element Research, 148(2), pp. 139-147. doi:10.1007/s12011-012-9352-6
[publisher’s website]
Chikarakara, E., Naher, S. and Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi:10.1016/j.surfcoat.2012.01.010
[publisher’s website]
Lipowiecki, M., Ryvolova, M., Tottosi, A., Naher, S. and Brabazon, D. (2012). Permeability of rapid prototyped artificial bone scaffold structures. Advanced Materials Research, 445, pp. 607-612. doi:10.4028/www.scientific.net/AMR.445.607
[publisher’s website]
Naher, S., O'Callaghan, D. and Brabazon, D. (2012). A powered technique for inserting acetabular cups. Advanced Materials Research, 445, pp. 1011-1016. doi:10.4028/www.scientific.net/AMR.445.1011
[publisher’s website]
Aqida, S.N., Naher, S. and Brabazon, D. (2012). Thermal simulation of laser surface modification of H13 die steel. Key Engineering Materials, 504-506, pp. 351-356. doi:10.4028/www.scientific.net/KEM.504-506.351
[publisher’s website]
Aqida, S.N., Brabazon, D. and Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science and Processing pp. 1-4
Aqida, S.N., Brabazon, D. and Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science and Processing pp. 1-6
Afridi, H.I., Kazi, T.G., Brabazon, D. and Naher, S. (2011). Association between essential trace and toxic elements in scalp hair samples of smokers rheumatoid arthritis subjects. Sci Total Environ, 412-413, pp. 93-100. doi:10.1016/j.scitotenv.2011.09.033
[publisher’s website]
Tamtam, A., Gallagher, F., Olabi, A.G. and Naher, S. (2011). Higher education in Libya, system under stress. Procedia Social and Behavioral Sciences, 29, pp. 742-751. doi:10.1016/j.sbspro.2011.11.300
[publisher’s website]
Afridi, H.I., Brabazon, D., Kazi, T.G., Naher, S. and Nesterenko, E. (2011). Comparative metal distribution in scalp hair of Pakistani and Irish referents and hypertensive patients. Biol Trace Elem Res, 143(3), pp. 1367-1382. doi:10.1007/s12011-011-8985-1
[publisher’s website]
Afridi, H.I., Brabazon, D., Kazi, T.G. and Naher, S. (2011). Evaluation of essential trace and toxic elements in scalp hair samples of smokers and alcohol user hypertensive patients. Biol Trace Elem Res, 143(3), pp. 1349-1366. doi:10.1007/s12011-011-8984-2
[publisher’s website]
Naher, S. and Derham, P. (2011). Design and manufacture of vacuum forming moulds. Advanced Materials Research, 264-265, pp. 1500-1505. doi:10.4028/www.scientific.net/AMR.264-265.1500
[publisher’s website]
Chikarakara, E., Naher, S. and Brabazon, D. (2011). Analysis of microstructural changes during pulsed CO2 laser surface processing of AISI 316L stainless steel. Advanced Materials Research, 264-265, pp. 1404-1408. doi:10.4028/www.scientific.net/AMR.264-265.1401
[publisher’s website]
Akhter, N., Rahman, F., Salman, M., Anam, K., Begum, N., Naher, S.... Benerjee, S.K. (2011). Valvular heart disease in pregnancy: maternal and fetal outcome. Mymensingh Med J, 20(3), pp. 436-440
Naher, S., Orpen, D., Brabazon, D., Poulsen, C.R. and Morshed, M.M. (2011). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19, pp. 1088-1095
[publisher’s website]
Aqida, S.N., Brabazon, D. and Naher, S. (2010). Designing pulse laser surface modification of H13 steel using response surface method. Aip Conference Proceedings, 1315, pp. 1371-1376. doi:10.1063/1.3552376
[publisher’s website]
Chikarakara, E., Naher, S. and Brabazon, D. (2010). Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. Applied Physics A Materials Science and Processing, 101(2), pp. 367-371. doi:10.1007/s00339-010-5843-5
[publisher’s website]
Aqida, S.N., Brabazon, D., Naher, S., Kovacs, Z. and Browne, D.J. (2010). Laser micro-processing of amorphous and partially crystalline Cu 45Zr48Al7 alloy. Applied Physics A Materials Science and Processing, 101(2), pp. 357-360. doi:10.1007/s00339-010-5829-3
[publisher’s website]
Naher, S., Orpen, D., Brabazon, D. and Morshed, M.M. (2010). An overview of microfluidic mixing application. Advanced Materials Research, 83-86, pp. 931-939. doi:10.4028/www.scientific.net/AMR.83-86.931
[publisher’s website]
Naher, S. and Vickery, G. (2010). Mixing of multiphase silicone for the production of breast prostheses. Advanced Materials Research, 83-86, pp. 616-621. doi:10.4028/www.scientific.net/AMR.83-86.616
[publisher’s website]
Aqida, S.N., Calosso, F., Brabazon, D., Naher, S. and Rosso, M. (2010). Thermal fatigue properties of laser treated steels at semi-solid processing temperature. International Journal of Material Forming, 3(SUPPL. 1), pp. 797-800
[publisher’s website]
Chikarakara, E., Aqida, S., Brabazon, D., Naher, S., Picas, J.A., Punset, M.... Forn, A. (2010). Surface modification of HVOF thermal sprayed WC-CoCr coatings by laser treatment. International Journal of Material Forming, 3(SUPPL. 1), pp. 801-804. doi:10.1007/s12289-010-0891-0
[publisher’s website]
Aqida, S.N., Maurel, M., Brabazon, D., Naher, S. and Rosso, M. (2009). Thermal stability of laser treated die material for semi-solid metal forming. International Journal of Material Forming, 2(SUPPL. 1), pp. 761-764. doi:10.1007/s12289-009-0540-7
[publisher’s website]
Naher, S. and Haseeb, A.S.M.A. (2008). Production and purification of zircon opacifier from zircon found in the coastal area of Bangladesh. Journal of Materials Processing Technology, 205(1-3), pp. 203-206. doi:10.1016/j.jmatprotec.2007.05.063
[publisher’s website]
Brabazon, D., Naher, S. and Biggs, P. (2008). Glazing of tool dies for semi-solid steel forming. International Journal of Material Forming, 1(SUPPL. 1), pp. 985-988. doi:10.1007/s12289-008-0223-9
[publisher’s website]
Brabazon, D., Naher, S. and Biggs, P. (2008). Laser surface modification of tool steel for semi-solid steel forming. Solid State Phenomena, 141-143, pp. 255-260. doi:10.4028/www.scientific.net/ssp.141-143.255
[publisher’s website]
Naher, S., Brabazon, D. and Looney, L. (2007). Computational and experimental analysis of particulate distribution during Al-SiC MMC fabrication. Composites Part A Applied Science and Manufacturing, 38(3), pp. 719-729. doi:10.1016/j.compositesa.2006.09.009
[publisher’s website]
Naher, S. and Haseeb, A.S.M.A. (2006). A technical note on the production of zirconia and zircon brick from locally available zircon in Bangladesh. Journal of Materials Processing Technology, 172(3), pp. 388-393. doi:10.1016/j.jmatprotec.2005.10.013
[publisher’s website]
Naher, S., Brabazon, D. and Looney, L. (2005). Development and assessment of a new quick quench stir caster design for the production of metal matrix composites. Journal of Materials Processing Technology, 166(3), pp. 430-439. doi:10.1016/j.jmatprotec.2004.09.043
[publisher’s website]
Naher, S., Brabazon, D. and Looney, L. (2003). Simulation of the stir casting process. Journal of Materials Processing Technology, 143-144(1), pp. 567-571. doi:10.1016/S0924-0136(03)00368-6
[publisher’s website]
Naher, S. and Haseeb, A.S.M.A. (2000). Physical, chemical and mineralogical investigations on Bangladesh zircon. Australasian Institute of Mining and Metallurgy Publication Series, (5), pp. 391-396

Other

Mahmoud, M., Ramadan, M., Naher, S., Pullen, K. and Olabi, A.-.G.(2022). Advances in Grout Materials in Borehole Heat Exchangers.
[Elsevier]

Professional activities

Editorial activity (2)

International Review Panel, International Symposium for Engineering Education 2010.
International Review Panel, International Symposium for Engineering Education 2012.

Events/conferences (6)

Laser Processing of Materials. Belgrade, Serbia (2012).
Description: Invited talk, 11th Young Researchers’ Conference on Materials Science and Engineering, 3-6 Dec 2012
Advances in Materials and Processing Technologies. Paris, France (2010).
Description: Session Chair, 24-27 Oct 2010, Paris, France
Advances in Materials and Processing Technologies. Malaysia (2009).
Description: Session Chair, 26-29 Oct 2009.
International Conference on Sustainable Energy and Environmental Protection. Dublin (2009).
Description: Organising Committee Member, Coordinator, Session Chair, 11-15 August, 2009, Dublin City University, Dublin
Laser glazing of metallic hip Implants. Dublin, Ireland (2009).
Description: Invited talk, Career Start Seminar Series, Dublin City University, Ireland
International Conference on Advances in Materials and Processing Technology. Kingdom of Bahrain (2008).
Description: Session Chair, 2-5 Nov, 2008.

Keynote lecture/speech

• S Naher, M.M. Arafat, Metal Oxides for gas sensing, ModTech® 2022 (Modern Technologies in Industrial Engineering) International Conference, June 22-25, 2022, Romania. Romania (2023).