- Brooks, S., Roy, R., Dirks, J.-.H. and Taylor, D. (2023). A systematic study of biological SE systems from complexity and design perspectives. Journal of Engineering Design, 34(11), pp. 897–921. doi:10.1080/09544828.2023.2266864.
- Morar, N.I., Holtham, N., Hackel, L., Davami, K., Sharma, M., DeWald, A. … Roy, R. (2023). Effects of high-energy laser peening followed by pre-hot corrosion on stress relaxation, microhardness, and fatigue life and strength of single-crystal nickel CMSX-4® superalloy. The International Journal of Advanced Manufacturing Technology, 126(11-12), pp. 4893–4912. doi:10.1007/s00170-023-11358-5.
- Morar, N.I., Holtham, N., Hackel, L., Davami, K., Sharma, M., DeWald, A. … Roy, R. (2023). Correction to: Effects of high‑energy laser peening followed by pre‑hot corrosion on stress relaxation, microhardness, and fatigue life and strength of single‑crystal nickel CMSX��4® superalloy. The International Journal of Advanced Manufacturing Technology, 126(11-12), pp. 4913–4913. doi:10.1007/s00170-023-11583-y.
- Brooks, S., Mahmood, M., Roy, R., Manolesos, M. and Salonitis, K. (2023). Self-reconfiguration simulations of turbines to reduce uneven farm degradation. Renewable Energy, 206, pp. 1301–1314. doi:10.1016/j.renene.2023.02.064.
- Palmarini, R., Del Amo, I.F., Ariansyah, D., Khan, S., Erkoyuncu, J.A. and Roy, R. (2023). Fast Augmented Reality Authoring: Fast Creation of AR Step-by-Step Procedures for Maintenance Operations. IEEE Access, 11, pp. 8407–8421. doi:10.1109/access.2023.3235871.
- Addepalli, S., Weyde, T., Namoano, B., Oyedeji, O.A., Wang, T., Erkoyuncu, J.A. … Roy, R. (2023). Automation of knowledge extraction for degradation analysis. CIRP Annals, 72(1), pp. 33–36. doi:10.1016/j.cirp.2023.03.013.
- Brooks, S. and Roy, R. (2022). Design and complexity evaluation of a self-cleaning heat exchanger. International Journal of Heat and Mass Transfer, 191, pp. 122725–122725. doi:10.1016/j.ijheatmasstransfer.2022.122725.
- Tahir Naz, A., Brooks, S. and Roy, R. (2022). Investigation of future applications of self-engineering using drones. Materials Today: Proceedings, 64, pp. 1255–1260. doi:10.1016/j.matpr.2022.03.717.
- Addepalli, S., Zhao, Y., Erkoyuncu, J.A. and Roy, R. (2021). Quantifying Uncertainty in Pulsed Thermographic Inspection by Analysing the Thermal Diffusivity Measurements of Metals and Composites. Sensors, 21(16). doi:10.3390/s21165480.
- Brooks, S. and Roy, R. (2021). An overview of self-engineering systems. Journal of Engineering Design, 32(8), pp. 397–447. doi:10.1080/09544828.2021.1914323.
- Grenyer, A., Erkoyuncu, J.A., Zhao, Y. and Roy, R. (2021). A systematic review of multivariate uncertainty quantification for engineering systems. CIRP Journal of Manufacturing Science and Technology, 33, pp. 188–208. doi:10.1016/j.cirpj.2021.03.004.
- Brooks, S. and Roy, R. (2020). A Complexity Framework for Self-Engineering Systems. Smart and Sustainable Manufacturing Systems, 4(3), pp. 254–259. doi:10.1520/ssms20200059.
- Fernández del Amo, I., Erkoyuncu, J., Vrabič, R., Frayssinet, R., Vazquez Reynel, C. and Roy, R. (2020). Structured authoring for AR-based communication to enhance efficiency in remote diagnosis for complex equipment. Advanced Engineering Informatics, 45, pp. 1–17. doi:10.1016/j.aei.2020.101096.
- Honarvar Shakibaei Asli, B., Flusser, J., Zhao, Y., Erkoyuncu, J.A., Banerjee Krishnan, K., Farrokhi, Y. … Roy, R. (2020). Ultrasound Image Filtering and Reconstruction Using DCT/IDCT Filter Structure. IEEE Access, 8, pp. 141342–141357. doi:10.1109/access.2020.3011970.
- Erkoyuncu, J.A., del Amo, I.F., Ariansyah, D., Bulka, D., Vrabič, R. and Roy, R. (2020). A design framework for adaptive digital twins. CIRP Annals, 69(1), pp. 145–148. doi:10.1016/j.cirp.2020.04.086.
- Gao, R.X., Yan, R., Roy, R., Erkoyuncu, J., Tracht, K. and Wang, P. (2020). Preface. Procedia Manufacturing, 49, pp. 1–1. doi:10.1016/j.promfg.2020.06.002.
- Turner, C.J., Emmanouilidis, C., Tomiyama, T., Tiwari, A. and Roy, R. (2019). Intelligent decision support for maintenance: an overview and future trends. International Journal of Computer Integrated Manufacturing, 32(10), pp. 936–959. doi:10.1080/0951192x.2019.1667033.
- Farsi, M., Erkoyuncu, J.A., Steenstra, D. and Roy, R. (2019). A modular hybrid simulation framework for complex manufacturing system design. Simulation Modelling Practice and Theory, 94, pp. 14–30. doi:10.1016/j.simpat.2019.02.002.
- Tedeschi, S., Emmanouilidis, C., Mehnen, J. and Roy, R. (2019). A Design Approach to IoT Endpoint Security for Production Machinery Monitoring. Sensors, 19(10), pp. 2355–2355. doi:10.3390/s19102355.
- Erkoyuncu, J.A., Roy, R., Shehab, E., Durugbo, C., Khan, S. and Datta, P. (2019). An effective uncertainty based framework for sustainable industrial product-service system transformation. Journal of Cleaner Production, 208, pp. 160–177. doi:10.1016/j.jclepro.2018.09.182.
- Addepalli, S., Zhao, Y., Roy, R., Galhenege, W., Colle, M., Yu, J. … Ucur, A. (2019). Non-destructive evaluation of localised heat damage occurring in carbon composites using thermography and thermal diffusivity measurement. Measurement, 131, pp. 706–713. doi:10.1016/j.measurement.2018.09.040.
- Sirikham, A., Zhao, Y., Nezhad, H.Y., Du, W. and Roy, R. (2019). Estimation of Damage Thickness in Fiber-Reinforced Composites using Pulsed Thermography. IEEE Transactions on Industrial Informatics, 15(1), pp. 445–453. doi:10.1109/tii.2018.2878758.
- Grenyer, A., Dinmohammadi, F., Erkoyuncu, J.A., Zhao, Y. and Roy, R. (2019). Current practice and challenges towards handling uncertainty for effective outcomes in maintenance. Procedia CIRP, 86, pp. 282–287. doi:10.1016/j.procir.2020.01.024.
- Fernández del Amo, I., Erkoyuncu, J.A., Roy, R., Palmarini, R. and Onoufriou, D. (2018). A systematic review of Augmented Reality content-related techniques for knowledge transfer in maintenance applications. Computers in Industry, 103, pp. 47–71. doi:10.1016/j.compind.2018.08.007.
- Morar, N.I., Roy, R., Mehnen, J., Marithumu, S., Gray, S., Roberts, T. … Nicholls, J. (2018). Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes. The International Journal of Advanced Manufacturing Technology, 95(9-12), pp. 4059–4070. doi:10.1007/s00170-017-1481-9.
- Wan, S., Li, D., Gao, J., Roy, R. and He, F. (2018). A collaborative machine tool maintenance planning system based on content management technologies. The International Journal of Advanced Manufacturing Technology, 94(5-8), pp. 1639–1653. doi:10.1007/s00170-016-9829-0.
- Palmarini, R., Erkoyuncu, J.A., Roy, R. and Torabmostaedi, H. (2018). A systematic review of augmented reality applications in maintenance. Robotics and Computer-Integrated Manufacturing, 49, pp. 215–228. doi:10.1016/j.rcim.2017.06.002.
- Tedeschi, S., Rodrigues, D., Emmanouilidis, C., Erkoyuncu, J., Roy, R. and Starr, A. (2018). A cost estimation approach for IoT modular architectures implementation in legacy systems. Procedia Manufacturing, 19, pp. 103–110. doi:10.1016/j.promfg.2018.01.015.
- Palmarini, R., Fernandez del Amo, I., Bertolini, G., Dino, G., Erkonyucu, J.A., Roy, R. … Farnsworth, M. (2018). Designing an AR interface to improve trust in Human-Robots collaboration. Procedia CIRP, 70, pp. 350–355. doi:10.1016/j.procir.2018.01.009.
- (2018). Foreword. Procedia Manufacturing, 19, pp. 1–1. doi:10.1016/j.promfg.2018.01.001.
- Addepalli, S., Pagalday, G., Salonitis, K. and Roy, R. (2018). Socio-economic and demographic factors that contribute to the growth of the civil aviation industry. Procedia Manufacturing, 19, pp. 2–9. doi:10.1016/j.promfg.2018.01.002.
- Grenyer, A., Addepalli, S., Zhao, Y., Oakey, L., Erkoyuncu, J.A. and Roy, R. (2018). Identifying challenges in quantifying uncertainty: case study in infrared thermography. Procedia CIRP, 73, pp. 108–113. doi:10.1016/j.procir.2018.03.301.
- Fernández del Amo, I., Erkoyuncu, J.A., Roy, R. and Wilding, S. (2018). Augmented Reality in Maintenance: An information-centred design framework. Procedia Manufacturing, 19, pp. 148–155. doi:10.1016/j.promfg.2018.01.021.
- del Amo, I.F., Galeotti, E., Palmarini, R., Dini, G., Erkoyuncu, J. and Roy, R. (2018). An innovative user-centred support tool for Augmented Reality maintenance systems design: a preliminary study. Procedia CIRP, 70, pp. 362–367. doi:10.1016/j.procir.2018.02.020.
- Zhao, Y., Addepalli, S., Sirikham, A. and Roy, R. (2018). A confidence map based damage assessment approach using pulsed thermographic inspection. NDT & E International, 93, pp. 86–97. doi:10.1016/j.ndteint.2017.10.001.
- Farsi, M., Grenyer, A., Sachidananda, M., Sceral, M., Mcvey, S., Erkoyuncu, J. … Roy, R. (2018). Conceptualising the impact of information asymmetry on through-life cost: case study of machine tools sector. Procedia Manufacturing, 16, pp. 99–106. doi:10.1016/j.promfg.2018.10.172.
- Tinsley, L., Chalk, C., Nicholls, J., Mehnen, J. and Roy, R. (2017). A study of pulsed thermography for life assessment of thin EB-PVD TBCs undergoing oxidation ageing. NDT & E International, 92, pp. 67–74. doi:10.1016/j.ndteint.2017.08.001.
- Roy, R., Tiwari, A., Stark, R. and Lee, J. (2017). Editorial for the Special Issue on Through-Life Engineering Services. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(13), pp. 2241–2241. doi:10.1177/0954405417733604.
- Shen, J., Erkoyuncu, J.A., Roy, R. and Wu, B. (2017). A framework for cost evaluation in product service system configuration. International Journal of Production Research, 55(20), pp. 6120–6144. doi:10.1080/00207543.2017.1325528.
- Morar, N., Roy, R., Mehnen, J., Nicholls, J.R. and Gray, S. (2017). The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C. International Journal of Fatigue, 102, pp. 112–120. doi:10.1016/j.ijfatigue.2017.04.017.
- Kakander, E., Roy, R. and Mehnen, J. (2017). A Simulation Based Approach to Model Design Influence on the Fatigue Life of a Vented Brake Disc. Procedia CIRP, 59, pp. 41–46. doi:10.1016/j.procir.2016.09.022.
- Palmarini, R., Erkoyuncu, J.A. and Roy, R. (2017). An Innovative Process to Select Augmented Reality (AR) Technology for Maintenance. Procedia CIRP, 59. doi:10.1016/j.procir.2016.10.001.
- Okoh, C., Roy, R. and Mehnen, J. (2017). Predictive Maintenance Modelling for Through-Life Engineering Services. Procedia CIRP, 59, pp. 196–201. doi:10.1016/j.procir.2016.09.033.
- Tedeschi, S., Mehnen, J., Tapoglou, N. and Roy, R. (2017). Secure IoT Devices for the Maintenance of Machine Tools. Procedia CIRP, 59, pp. 150–155. doi:10.1016/j.procir.2016.10.002.
- Addepalli, S., Roy, R., Axinte, D. and Mehnen, J. (2017). ‘In-situ’ Inspection Technologies: Trends in Degradation Assessment and Associated Technologies. Procedia CIRP, 59, pp. 35–40. doi:10.1016/j.procir.2016.10.003.
- Zhao, Y., Mehnen, J., Sirikham, A. and Roy, R. (2017). A Novel Defect Depth Measurement Method based on Nonlinear System Identification for Pulsed Thermographic Inspection. Mechanical Systems and Signal Processing, 85, pp. 382–395. doi:10.1016/j.ymssp.2016.08.033.
- Okoh, C., Roy, R. and Mehnen, J. (2017). Maintenance Informatics Dashboard Design for Through-life Engineering Services. Procedia CIRP, 59, pp. 166–171. doi:10.1016/j.procir.2016.09.019.
- Wan, S., Li, D., Gao, J., Roy, R. and Tong, Y. (2017). Process and knowledge management in a collaborative maintenance planning system for high value machine tools. Computers in Industry, 84, pp. 14–24. doi:10.1016/j.compind.2016.11.002.
- Erkoyuncu, J.A., del Amo, I.F., Dalle Mura, M., Roy, R. and Dini, G. (2017). Improving efficiency of industrial maintenance with context aware adaptive authoring in augmented reality. CIRP Annals, 66(1), pp. 465–468. doi:10.1016/j.cirp.2017.04.006.
- (2017). Foreword. Procedia CIRP, 59, pp. 1–1. doi:10.1016/j.procir.2017.02.010.
- Yazdani Nezhad, H., Zhao, Y., Liddel, P.D., Marchante, V. and Roy, R. (2017). A novel process-linked assembly failure model for adhesively bonded composite structures. CIRP Annals, 66(1), pp. 29–32. doi:10.1016/j.cirp.2017.04.103.
- Zhao, Y., Tinsley, L., Addepalli, S., Mehnen, J. and Roy, R. (2016). A coefficient clustering analysis for damage assessment of composites based on pulsed thermographic inspection. NDT & E International, 83, pp. 59–67. doi:10.1016/j.ndteint.2016.06.003.
- Kennedy, D., Ilanko, S., Banerjee, J.R., António, C.C., Castro, C.F., Sextos, A.G. … Topping, B.H.V. (2016). Editorial. Computers and Structures, 174, pp. 1–2. doi:10.1016/j.compstruc.2016.07.010.
- Ahmet Erkoyuncu, J., Khan, S., Hussain, S.M.F. and Roy, R. (2016). A framework to estimate the cost of No-Fault Found events. International Journal of Production Economics, 173, pp. 207–222. doi:10.1016/j.ijpe.2015.12.013.
- Allwood, J.M., Childs, T.H.C., Clare, A.T., De Silva, A.K.M., Dhokia, V., Hutchings, I.M. … Turner, S. (2016). Manufacturing at double the speed. Journal of Materials Processing Technology, 229, pp. 729–757. doi:10.1016/j.jmatprotec.2015.10.028.
- Roy, R., Stark, R., Tracht, K., Takata, S. and Mori, M. (2016). Continuous maintenance and the future – Foundations and technological challenges. CIRP Annals, 65(2), pp. 667–688. doi:10.1016/j.cirp.2016.06.006.
- Vasantha, G.V.A., Roy, R. and Corney, J.R. (2015). Advances in Designing Product-Service Systems. Journal of the Indian Institute of Science, 95(4), pp. 429–447.
- Redding, L.E., Tiwari, A., Roy, R., Phillips, P. and Shaw, A. (2015). The adoption and use of through-life engineering services within UK manufacturing organisations. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(10), pp. 1848–1866. doi:10.1177/0954405414539931.
- Masood, T., Roy, R., Harrison, A., Xu, Y., Gregson, S. and Reeve, C. (2015). Integrating through-life engineering service knowledge with product design and manufacture. International Journal of Computer Integrated Manufacturing, 28(1), pp. 59–74. doi:10.1080/0951192x.2014.900858.
- Tedeschi, S., Mehnen, J., Tapoglou, N. and Rajkumar, R. (2015). Security Aspects in Cloud Based Condition Monitoring of Machine Tools. Procedia CIRP, 38, pp. 47–52. doi:10.1016/j.procir.2015.07.046.
- Addepalli, S., Eiroa, D., Lieotrakool, S., François, A.-.L., Guisset, J., Sanjaime, D. … Phillips, P. (2015). Degradation Study of Heat Exchangers. Procedia CIRP, 38, pp. 137–142. doi:10.1016/j.procir.2015.07.057.
- Vasantha, G.V.A., Roy, R. and Corney, J.R. (2015). Advances in Designing Product-Service Systems. Journal of the Indian Institute of Science, 95, pp. 429–447.
- Rajagopal, S., Erkoyuncu, J.A. and Roy, R. (2015). Impact of Software Obsolescence in Defence Manufacturing Sectors. Procedia CIRP, 28, pp. 197–201. doi:10.1016/j.procir.2015.04.034.
- Sabaei, D., Erkoyuncu, J. and Roy, R. (2015). Positioning of Spare Part Contracts in the Servitisation Process. Procedia CIRP, 38, pp. 106–111. doi:10.1016/j.procir.2015.08.035.
- Erkoyuncu, J.A., Apa, M. and Roy, R. (2015). Quantifying Risk Mitigation Strategies for Manufacturing and Service Delivery. Procedia CIRP, 28, pp. 179–184. doi:10.1016/j.procir.2015.04.031.
- Redding, L.E., Hockley, C.J., Roy, R. and Menhen, J. (2015). The Role of Maintenance, Repair, and Overhaul (MRO) Knowledge in Facilitating Service Led Design: A Nozzle Guide Vane Case Study. pp. 379–395. doi:10.1007/978-3-319-15536-4_31.
- Roy, R. (2015). Foreword. Procedia CIRP, 38, pp. 1–2. doi:10.1016/j.procir.2015.08.099.
- Emmanuel-Ebikake, O., Roy, R. and Shehab, E. (2014). Supplier sustainability assessment for the UK defence industry. International Journal of Productivity and Performance Management, 63(8), pp. 968–990. doi:10.1108/ijppm-03-2013-0048.
- Ahmet Erkoyuncu, J., Roy, R., Shehab, E. and Kutsch, E. (2014). An innovative uncertainty management framework to support contracting for product-service availability. Journal of Service Management, 25(5), pp. 603–638. doi:10.1108/josm-07-2013-0193.
- Neely, A., Ng, I. and Roy, R. (2014). Complex engineering service systems. Journal of Service Management, 25(5). doi:10.1108/josm-03-2014-0080.
- Roy, R. (2014). Foreword. Procedia CIRP, 22, pp. 1–2. doi:10.1016/j.procir.2014.08.012.
- Masood, T., Erkoyuncu, J.A., Roy, R. and Harrison, A. (2014). Integrating design attributes, knowledge and uncertainty in aerospace sector. CIRP Journal of Manufacturing Science and Technology, 7(2), pp. 83–96. doi:10.1016/j.cirpj.2014.02.001.
- Romero Rojo, F.J., Roy, R. and Shehab, E. (2014). A methodology for variability reduction in manufacturing cost estimating in the automotive industry based on design features. Competitive Design - Proceedings of the 19th CIRP Design Conference pp. 197–201.
- Mehnen, J., Tinsley, L. and Roy, R. (2014). Automated in-service damage identification. CIRP Annals, 63(1), pp. 33–36. doi:10.1016/j.cirp.2014.03.016.
- Vasantha, G., Roy, R. and Corney, J. (2014). Challenges and opportunities in transforming laser system industry to deliver integrated product and service offers. IFIP Advances in Information and Communication Technology, 434, pp. 127–134.
- Arundachawat, P., Roy, R., Al-Ashaab, A. and Shehab, E. (2014). Design rework prediction in concurrent design environment: Current trends and future research directions. Competitive Design - Proceedings of the 19th CIRP Design Conference pp. 237–244.
- Goteng, G., Tiwari, A. and Roy, R. (2014). Grid services for multi-objective optimisation. Competitive Design - Proceedings of the 19th CIRP Design Conference pp. 73–77.
- Okoh, C., Roy, R., Mehnen, J. and Redding, L. (2014). Overview of Remaining Useful Life Prediction Techniques in Through-life Engineering Services. Procedia CIRP, 16, pp. 158–163. doi:10.1016/j.procir.2014.02.006.
- Roy, R., Mehnen, J., Addepalli, S., Redding, L., Tinsley, L. and Okoh, C. (2014). Service Knowledge Capture and Reuse. Procedia CIRP, 16, pp. 9–14. doi:10.1016/j.procir.2014.03.001.
- Rajagopal, S., Erkoyuncu, J.A. and Roy, R. (2014). Software Obsolescence in Defence. Procedia CIRP, 22, pp. 76–80. doi:10.1016/j.procir.2014.07.121.
- Gomez, M., Baxter, D., Roy, R. and Kalta, M. (2014). Through-life integration using PLM. Competitive Design - Proceedings of the 19th CIRP Design Conference pp. 155–162.
- Azene, Y.T., Roy, R., Farrugia, D., Onisa, C., Mehnen, J. and Trautmann, H. (2014). Work roll cooling system design optimisation in presence of uncertainty. Competitive Design - Proceedings of the 19th CIRP Design Conference pp. 57–64.
- Erkoyuncu, J.A., Steenstra, D., Salbrechter, F. and Roy, R. (2013). Building a software platform to guide doctors and nurses with ultrasound scanning. 2013 IEEE 4th International Conference on Cognitive Infocommunications (CogInfoCom) pp. 573–578. doi:10.1109/coginfocom.2013.6719168.
- Gokula Vijaykumar, A.V., Komoto, H., Hussain, R., Roy, R., Tomiyama, T., Evans, S. … Williams, S. (2013). A manufacturing framework for capability-based product-service systems design. Journal of Remanufacturing, 3(1). doi:10.1186/2210-4690-3-8.
- Erkoyuncu, J.A., Durugbo, C. and Roy, R. (2013). Identifying uncertainties for industrial service delivery: a systems approach. International Journal of Production Research, 51(21), pp. 6295–6315. doi:10.1080/00207543.2013.794316.
- Erkoyuncu, J.A., Durugbo, C., Shehab, E., Roy, R., Parker, R., Gath, A. … Howell, D. (2013). Uncertainty driven service cost estimation for decision support at the bidding stage. International Journal of Production Research, 51(19), pp. 5771–5788. doi:10.1080/00207543.2013.794318.
- Roy, R., Shaw, A., Erkoyuncu, J.A. and Redding, L. (2013). Through-Life Engineering Services. Measurement and Control, 46(6), pp. 172–175. doi:10.1177/0020294013492283.
- Datta, P.P., Srivastava, A. and Roy, R. (2013). A simulation study on maintainer resource utilization of a fast jet aircraft maintenance line under availability contract. Computers in Industry, 64(5), pp. 543–555. doi:10.1016/j.compind.2013.02.011.
- Arundacahawat, P., Roy, R. and Al-Ashaab, A. (2013). An analogy based estimation framework for design rework efforts. Journal of Intelligent Manufacturing, 24(3), pp. 625–639. doi:10.1007/s10845-011-0605-6.
- Datta, P.P. and Roy, R. (2013). Incentive issues in performance-based outsourcing contracts in the UK defence industry: a simulation study. Production Planning & Control, 24(4-5), pp. 359–374. doi:10.1080/09537287.2011.648488.
- Guillebert, V., Nyingifa, E., Frangolho, D., Loureiro, C.C., Sporen, A., Tinsley, L. … Roy, R. (2013). Development of a Thermographic NDI System for Service Damage Identification in Inaccessible Areas. Procedia CIRP, 11, pp. 124–129. doi:10.1016/j.procir.2013.07.054.
- Price, M.A., Robinson, T.T., Soban, D., Murphy, A., Armstrong, C.G., McConnell, R. … Roy, R. (2013). Maintaining design intent for aircraft manufacture. CIRP Annals, 62(1), pp. 99–102. doi:10.1016/j.cirp.2013.03.124.
- Annamalai Vasantha, G.V., Hussain, R., Cakkol, M. and Roy, R. (2013). Product-Service Systems Design Using Stakeholders’ Information. pp. 353–366. doi:10.1007/978-1-4471-4507-3_34.
- Roy, R. (2013). Foreword. Procedia CIRP, 11, pp. v–v. doi:10.1016/j.procir.2013.08.003.
- Bankole, O., Roy, R., Shehab, E. and Cheruvu, K. (2012). A prediction system for assessing customer affordability of whole life cycle cost in defence industry. Journal of Intelligent Manufacturing, 23(6), pp. 2407–2425. doi:10.1007/s10845-010-0482-4.
- Chiang, T.-.A. and Roy, R. (2012). An intelligent benchmark-based design for environment system for derivative electronic product development. Computers in Industry, 63(9), pp. 913–929. doi:10.1016/j.compind.2012.08.014.
- Achanga, P., Shehab, E., Roy, R. and Nelder, G. (2012). A fuzzy-logic advisory system for lean manufacturing within SMEs. International Journal of Computer Integrated Manufacturing, 25(9), pp. 839–852. doi:10.1080/0951192x.2012.665180.
- Vasantha, G.V.A., Roy, R., Lelah, A. and Brissaud, D. (2012). A review of product–service systems design methodologies. Journal of Engineering Design, 23(9), pp. 635–659. doi:10.1080/09544828.2011.639712.
- Rojo, F.J.R., Roy, R. and Kelly, S. (2012). Obsolescence Risk Assessment Process Best Practice. Journal of Physics: Conference Series, 364, pp. 12095–12095. doi:10.1088/1742-6596/364/1/012095.
- Rojo, F.J.R., Baguley, P., Shaikh, N., Roy, R. and Kelly, S. (2012). TOMCAT: An Obsolescence Management Capability Assessment Framework. Journal of Physics: Conference Series, 364, pp. 12098–12098. doi:10.1088/1742-6596/364/1/012098.
- Xu, Y., Elgh, F., Erkoyuncu, J.A., Bankole, O., Goh, Y., Cheung, W.M. … Roy, R. (2012). Cost Engineering for manufacturing: Current and future research. International Journal of Computer Integrated Manufacturing, 25(4-5), pp. 300–314. doi:10.1080/0951192x.2010.542183.
- Bankole, O.O., Roy, R., Shehab, E., Cheruvu, K. and Johns, T. (2012). Product–service system affordability in defence and aerospace industries: state-of-the-art and current industrial practice. International Journal of Computer Integrated Manufacturing, 25(4-5), pp. 398–416. doi:10.1080/0951192x.2011.576271.
- Romero Rojo, F.J., Roy, R., Shehab, E., Cheruvu, K. and Mason, P. (2012). A cost estimating framework for electronic, electrical and electromechanical (EEE) components obsolescence within the use-oriented product–service systems contracts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226(1), pp. 154–166. doi:10.1177/0954405411406774.
- Rojo, F.J.R., Roy, R., Shehab, E. and Cheruvu, K. (2012). A study on obsolescence resolution profiles. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226(1), pp. 167–177. doi:10.1177/0954405411407565.
- Vasantha, G.V.A., Hussain, R., Roy, R., Tiwari, A. and Evans, S. (2011). A framework for designing product service systems. ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design, 4, pp. 67–76.
- Roy, R. (2011). Welcome message from the WFSC chair. Advances in Intelligent and Soft Computing, 96 AISC.
- Roy, R., Souchoroukov, P. and Shehab, E. (2011). Detailed cost estimating in the automotive industry: Data and information requirements. International Journal of Production Economics, 133(2), pp. 694–707. doi:10.1016/j.ijpe.2011.05.018.
- Priya Datta, P. and Roy, R. (2011). Operations strategy for the effective delivery of integrated industrial product‐service offerings. International Journal of Operations & Production Management, 31(5), pp. 579–603. doi:10.1108/01443571111126337.
- Shehab, E. and Roy, R. (2011). Guest editorial: IJAMT special issue on: product-service systems. The International Journal of Advanced Manufacturing Technology, 52(9-12), pp. 1115–1116. doi:10.1007/s00170-010-2995-6.
- Erkoyuncu, J.A., Roy, R., Shehab, E. and Cheruvu, K. (2011). Understanding service uncertainties in industrial product–service system cost estimation. The International Journal of Advanced Manufacturing Technology, 52(9-12), pp. 1223–1238. doi:10.1007/s00170-010-2767-3.
- Mountney, S., Roy, R. and Gao, J. (2011). Acquiring Innovative Manufacturing Engineering Knowledge for the Preliminary Design of Complex Mechanical Components. pp. 457–464. doi:10.1007/978-3-642-15973-2_46.
- Zhao, Y., Harrison, A., Roy, R. and Mehnen, J. (2011). Aircraft engine component deterioration and Life Cycle Cost estimation. Glocalized Solutions for Sustainability in Manufacturing - Proceedings of the 18th CIRP International Conference on Life Cycle Engineering pp. 657–662. doi:10.1007/978-3-642-19692-8_114.
- Sanya, I., Shehab, E., Roy, R., Houseman, O. and Jonik, M. (2011). Semantic knowledge based approach for product maintenance support. Global Product Development - Proceedings of the 20th CIRP Design Conference pp. 73–80. doi:10.1007/978-3-642-15973-2_8.
- Roy, R. (2010). Welcome note by the world federation on soft computing (WFSC) chairman. Advances in Intelligent and Soft Computing, 75.
- Stelling, M.T., Roy, R., Tiwari, A. and Majeed, B. (2010). Evaluation of business processes using probability-driven activity-based costing. The Service Industries Journal, 30(13), pp. 2239–2260. doi:10.1080/02642060802706972.
- Romero Rojo, F.J., Roy, R. and Shehab, E. (2010). Obsolescence management for long-life contracts: state of the art and future trends. The International Journal of Advanced Manufacturing Technology, 49(9-12), pp. 1235–1250. doi:10.1007/s00170-009-2471-3.
- Momoh, A., Roy, R. and Shehab, E. (2010). Challenges in enterprise resource planning implementation: state‐of‐the‐art. Business Process Management Journal, 16(4), pp. 537–565. doi:10.1108/14637151011065919.
- Datta, P.P. and Roy, R. (2010). Cost modelling techniques for availability type service support contracts: A literature review and empirical study. CIRP Journal of Manufacturing Science and Technology, 3(2), pp. 142–157. doi:10.1016/j.cirpj.2010.07.003.
- Durugbo, C., Erkoyuncu, J.A., Tiwari, A., Alcock, J.R., Roy, R. and Shehab, E. (2010). Data uncertainty assessment and information flow analysis for product-service systems in a library case study. International Journal of Services Operations and Informatics, 5(4), pp. 330–330. doi:10.1504/ijsoi.2010.037002.
- Goteng, G., Tiwari, A. and Roy, R. (2010). Grid services for multi-objective design optimisation. CIRP Journal of Manufacturing Science and Technology, 3(4), pp. 249–261. doi:10.1016/j.cirpj.2011.01.005.
- Azene, Y.T., Roy, R., Farrugia, D., Onisa, C., Mehnen, J. and Trautmann, H. (2010). Work roll cooling system design optimisation in presence of uncertainty and constrains. CIRP Journal of Manufacturing Science and Technology, 2(4), pp. 290–298. doi:10.1016/j.cirpj.2010.06.001.
- Bankole, O.O., Roy, R., Shehab, E. and Cheruvu, K. (2010). An affordability prediction system to assess information availability in defence projects. Advances in Intelligent and Soft Computing, 66 AISC, pp. 1613–1626.
- Roy, R., Mehnen, J. and Brissaud, D. (2010). Competitive design. CIRP Journal of Manufacturing Science and Technology, 2(4), pp. 225–225. doi:10.1016/j.cirpj.2010.08.005.
- Arundachawat, P., Roy, R. and Al-Ashaab, A. (2010). Estimation Design Rework Efforts in the Early Phase of Design and Development. pp. 653–661. doi:10.1007/978-0-85729-024-3_61.
- Meier, H., Roy, R. and Seliger, G. (2010). Industrial Product-Service Systems—IPS 2. CIRP Annals, 59(2), pp. 607–627. doi:10.1016/j.cirp.2010.05.004.
- Roy, R., Tiwari, A. and Meier, H. (2010). Editorial. CIRP Journal of Manufacturing Science and Technology, 3(2), pp. 89–89. doi:10.1016/j.cirpj.2010.11.001.
- Baxter, D., Roy, R., Doultsinou, A., Gao, J. and Kalta, M. (2009). A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22(12), pp. 1073–1088. doi:10.1080/09511920903207464.
- Butterfield, J., Ng, I., Roy, R. and McEwan, W. (2009). Enabling value co-production in the provision of support service engineering solutions using digital manufacturing methods. Proceedings of the 2009 Winter Simulation Conference (WSC) pp. 3009–3022. doi:10.1109/wsc.2009.5429222.
- Doultsinou, A., Roy, R., Baxter, D., Gao, J. and Mann, A. (2009). Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20(4), pp. 389–411. doi:10.1080/09544820903149354.
- Roy, R. and Baxter, D. (2009). Product-service systems. Journal of Engineering Design, 20(4), pp. 327–328. doi:10.1080/09544820903149271.
- Azarenko, A., Roy, R., Shehab, E. and Tiwari, A. (2009). Technical product‐service systems: some implications for the machine tool industry. Journal of Manufacturing Technology Management, 20(5), pp. 700–722. doi:10.1108/17410380910961064.
- Roy, R., Shehab, E. and Tiwari, A. (2009). Product-service systems. Journal of Manufacturing Technology Management, 20(5). doi:10.1108/jmtm.2009.06820eaa.001.
- Roy, R. (2009). Welcome Note by the World Federation on Soft Computing (WFSC) Chairman. Advances in Intelligent and Soft Computing, 58.
- Roy, R. and Cheruvu, K.S. (2009). A competitive framework for industrial product-service systems. International Journal of Internet Manufacturing and Services, 2(1), pp. 4–4. doi:10.1504/ijims.2009.031337.
- Roy, R., Goatman, M. and Khangura, K. (2009). User-centric design and Kansei Engineering. CIRP Journal of Manufacturing Science and Technology, 1(3), pp. 172–178. doi:10.1016/j.cirpj.2008.10.007.
- Baxter, D., Roy, R. and Gao, J. (2009). Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management, 18(2), pp. 183–183. doi:10.1504/ijmtm.2009.026193.
- Arundacahawat, P., Roy, R. and Al-Ashaab, A. (2009). An Analogy Based Estimation Framework for Design Rework Efforts. pp. 203–211. doi:10.1007/978-1-84882-762-2_19.
- Xu, Y., Roy, R., Cassaro, G. and Ramsden, J. (2009). Development of a cost estimating framework for nanotechnology based products. Global Perspective for Competitive Enterprise, Economy and Ecology - Proceedings of the 16th ISPE International Conference on Concurrent Engineering pp. 193–201.
- Roy, R., Azene, Y.T., Farrugia, D., Onisa, C. and Mehnen, J. (2009). Evolutionary multi-objective design optimisation with real life uncertainty and constraints. CIRP Annals, 58(1), pp. 169–172. doi:10.1016/j.cirp.2009.03.021.
- Goteng, G., Tiwari, A. and Roy, R. (2009). Grid Computing. pp. 269–280. doi:10.4018/978-1-60566-184-1.ch027.
- Roy, R., Souchoroukov, P. and Griggs, T. (2008). Function-based cost estimating. International Journal of Production Research, 46(10), pp. 2621–2650. doi:10.1080/00207540601094440.
- Houseman, O., Coley, F. and Roy, R. (2008). Comparing the cognitive actions of design engineers and cost estimators. Journal of Engineering Design, 19(2), pp. 145–158. doi:10.1080/09544820701802964.
- (2008). Cost engineering. Journal of Engineering Design, 19(2), pp. 97–98. doi:10.1080/09544820701868221.
- Tiwari, A., Oduguwa, V. and Roy, R. (2008). Rolling System Design Using Evolutionary Sequential Process Optimization. IEEE Transactions on Evolutionary Computation, 12(2), pp. 196–202. doi:10.1109/tevc.2007.896688.
- Bawden, D. (2008). Dust in space and documentation. Journal of Documentation, 64(1). doi:10.1108/jd.2008.27864aaa.001.
- Momoh, A., Roy, R. and Shehab, E. (2008). A work breakdown structure for implementing and costing an ERP project. Innovation and Knowledge Management in Business Globalization: Theory and Practice - Proceedings of the 10th International Business Information Management Association Conference, 1-2, pp. 1245–1254.
- Baxter, D., Gao, J. and Roy, R. (2008). Design Process Knowledge Reuse Challenges and Issues. Computer-Aided Design and Applications, 5(6), pp. 942–952. doi:10.3722/cadaps.2008.942-952.
- Momoh, A., Roy, R., Shehab, E. and Soliman, K.S. (2008). A Work Breakdown Structure for Implementing and Costing an ERP Project. Innovation and Knowledge Management in Business Globalization: Theory & Practice, Vols 1 and 2 pp. 1245–1254.
- Baxter, D., Doultsinou, A., Roy, R. and Gao, J. (2008). A life cycle model for product-service systems design. 5th International Conference on Digital Enterprise Technology, DET 2008 pp. 441–456.
- Momoh, A., Roy, R. and Shehab, E. (2008). A work breakdown structure for implementing and costing an ERP project. Innovation and Knowledge Management in Business Globalization: Theory and Practice - Proceedings of the 10th International Business Information Management Association Conference, 1-2, pp. 1245–1254.
- Houseman, O., Roy, R., Wainwright, C. and Lavdas, E. (2008). Cost optimising aircraft systems at a conceptual design stage. International Journal of Manufacturing Technology and Management, 15(3/4), pp. 328–328. doi:10.1504/ijmtm.2008.020174.
- Baxter, D., Gao, J. and Roy, R. (2008). Design process knowledge reuse challenges and issues. Computer-Aided Design and Applications, 5, pp. 942–952.
- Roy, R. and Mehnen, J. (2008). Dynamic multi-objective optimisation for machining gradient materials. CIRP Annals, 57(1), pp. 429–432. doi:10.1016/j.cirp.2008.03.020.
- Roy, R., Hinduja, S. and Teti, R. (2008). Recent advances in engineering design optimisation: Challenges and future trends. CIRP Annals, 57(2), pp. 697–715. doi:10.1016/j.cirp.2008.09.007.
- Mehnen, J. and Roy, R. (2008). Technology Transfer: Academia to Industry. pp. 263–281. doi:10.1007/978-3-540-75771-9_12.
- Roy, R., Tiwari, A., Tafasse Azene, Y. and Goteng, G. (2008). Evolutionary Computing in Engineering Design. pp. 167–184. doi:10.4018/978-1-59904-582-5.ch009.
- Hadden, J., Tiwari, A., Roy, R. and Ruta, D. (2007). Computer assisted customer churn management: State-of-the-art and future trends. Computers & Operations Research, 34(10), pp. 2902–2917. doi:10.1016/j.cor.2005.11.007.
- Baines, T.S., Lightfoot, H.W., Evans, S., Neely, A., Greenough, R., Peppard, J. … Wilson, H. (2007). State-of-the-art in product-service systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221(10), pp. 1543–1552. doi:10.1243/09544054jem858.
- Ríos, J., Planas, D. and Roy, R. (2007). Cost estimating training by doing: A Web-based, process-centred approach. International Journal of Engineering Education, 23(4), pp. 748–758.
- Roy, R. (2007). Cost Engineering. International Journal of Production Economics, 109(1-2), pp. 1–1. doi:10.1016/j.ijpe.2007.03.003.
- Rios, J., Roy, R. and Lopez, A. (2007). Design requirements change and cost impact analysis in airplane structures. International Journal of Production Economics, 109(1-2), pp. 65–80. doi:10.1016/j.ijpe.2006.11.004.
- Vergidis, K., Tiwari, A., Majeed, B. and Roy, R. (2007). Optimisation of business process designs: An algorithmic approach with multiple objectives. International Journal of Production Economics, 109(1-2), pp. 105–121. doi:10.1016/j.ijpe.2006.12.032.
- Coley, F., Houseman, O. and Roy, R. (2007). An introduction to capturing and understanding the cognitive behaviour of design engineers. Journal of Engineering Design, 18(4), pp. 311–325. doi:10.1080/09544820600963412.
- Satya, S., Rajkumar, R. and Ashutosh, T. (2007). Customised service system for contact centres - A case study based approach. WSEAS Transactions on Systems, 6(1), pp. 60–67.
- Ríos, J., Planas, D. and Roy, R. (2007). Cost estimating training by doing: A Web-based, process-centred approach. International Journal of Engineering Education, 23, pp. 748–758.
- Rios, J., Planas, D. and Roy, R. (2007). Cost estimating training by doing: a web-based, process-centred approach. International Journal of Engineering Education, 23, pp. 748–758.
- Oduguwa, V., Roy, R. and Farrugia, D. (2007). Development of a soft computing-based framework for engineering design optimisation with quantitative and qualitative search spaces. Applied Soft Computing, 7(1), pp. 166–188. doi:10.1016/j.asoc.2005.06.003.
- Tiwari, A., Goteng, G. and Roy, R. (2007). Evolutionary Computing within Grid Environment. pp. 229–248. doi:10.1007/978-3-540-72377-6_10.
- Tiwari, A., Vergidis, K. and Roy, R. (2007). Evolutionary optimization of business process designs. Studies in Computational Intelligence, 49, pp. 513–541.
- Mehnen, J., Roy, R., Kersting, P., Wagner, T. and ACM, (2007). ICSPEA: Evolutionary Five-Axis Milling Path Optimisation. Gecco 2007: Genetic and Evolutionary Computation Conference, Vol 1 and 2 pp. 2122–2128.
- Jallow, A.K., Majeed, B., Vergidis, K., Tiwari, A. and Roy, R. (2007). Operational risk analysis in business processes. BT Technology Journal, 25(1), pp. 168–177. doi:10.1007/s10550-007-0018-4.
- Roy, R., Baguley, P., Reeve, L. and Krause, F.L. (2007). Understanding the link between aesthetics and engineering in product design. Future of Product Development pp. 155–164.
- Roy, R. (2006). Message from WFSC chair. Advances in Soft Computing, 36.
- Houseman, O.W., Coley, F. and Roy, R. (2006). Capturing how cost engineers think. AACE International Transactions, 2006.
- Oduguwa, P.A., Roy, R. and Sackett, P.J. (2006). Cost impact analysis of requirement changes in the automotive industry: A case study. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(9), pp. 1509–1525. doi:10.1243/09544054jem275.
- Ling, D.J., Roy, R., Shehab, E., Jaiswal, J. and Stretch, J. (2006). Modelling the cost of railway asset renewal projects using pairwise comparisons. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 220(4), pp. 331–346. doi:10.1243/09544097jrrt31.
- Achanga, P., Shehab, E., Roy, R. and Nelder, G. (2006). Critical success factors for lean implementation within SMEs. Journal of Manufacturing Technology Management, 17(4), pp. 460–471. doi:10.1108/17410380610662889.
- Rajpathak, D.G., Motta, E., Zdrahal, Z. and Roy, R. (2006). A generic library of problem solving methods for scheduling applications. IEEE Transactions on Knowledge and Data Engineering, 18(6), pp. 815–828. doi:10.1109/tkde.2006.85.
- Oduguwa, V. and Roy, R. (2006). A review of rolling system design optimisation. International Journal of Machine Tools and Manufacture, 46(7-8), pp. 912–928. doi:10.1016/j.ijmachtools.2005.07.023.
- Kerr, C.I.V., Roy, R. and Sackett, P.J. (2006). Requirements management: an enabler for concurrent engineering in the automotive industry. International Journal of Production Research, 44(9), pp. 1703–1717. doi:10.1080/00207540500445263.
- Roy, R. (2006). Editorial. International Journal of Production Research, 44(9), pp. 1657–1657. doi:10.1080/00207540500445115.
- (2006). Soft Computing in the Service Industry. .
- Stelling, M., Roy, R., Tiwari, A. and Majeed, B. (2006). A coding mechanism for business process optimisation using genetic algorithms: Initial thoughts. Proceedings of the 10th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2006 pp. 312–316.
- Brintrup, A.M., Ramsden, J., Tiwari, A., Tiwari, A., Knowles, J., Avineri, E. … Roy, R. (2006). A review on design optimisation and exploration with interactive evolutionary computation. Applications of Soft Computing: Recent Trends pp. 111–120.
- Hadden, J., Tiwari, A., Roy, R., Ruta, D. and Ardil, C. (2006). Churn Prediction using Complaints Data. Proceedings of World Academy of Science, Engineering and Technology, Vol 13, 13, pp. 158–163.
- Shah, S., Roy, R. and Tiwari, A. (2006). Development of fuzzy expert system for customer and service advisor categorisation within contact centre environment. Advances in Soft Computing, 36, pp. 197–206.
- Lavdas, E., Roy, R., Wainwright, C., Ghodous, P., DiengKuntz, R. and Loureiro, G. (2006). Identifying the key factors affecting the quality of a cost estimate. Leading the Web in Concurrent Engineering: Next Generation Concurrent Engineering, 143, pp. 737–745.
- Oduguwa, A., Tiwari, A., Fiorentino, S. and Roy, R. (2006). Multi-objective optimisation of the protein-ligand docking problem in drug discovery. GECCO 2006 - Genetic and Evolutionary Computation Conference, 2, pp. 1793–1800.
- Oduguwa, A., Tiwari, A., Fiorentino, S., Roy, R. and Keijzer, M. (2006). Multi-objective optimisation of the protein-ligand docking problem in drug discovery. GECCO 2006: Genetic and Evolutionary Computation Conference, Vol 1 and 2 pp. 1793–1800.
- Houseman, O., Roy, R., Ghodous, P., DiengKuntz, R. and Loureiro, G. (2006). Understanding Decision Making in Cost Engineering Using Protocol Analysis. Leading the Web in Concurrent Engineering: Next Generation Concurrent Engineering, 143, pp. 707–714.
- Houseman, O.W., Roy, R., Wainwright, C. and Lavdas, E. (2005). Cost-estimating aircraft systems at a conceptual design stage. Next Generation Concurrent Engineering: Smart and Concurrent Integration of Product Data, Services, and Control Strategies, CE 2005 pp. 563–568.
- Roy, R., Colmer, S. and Griggs, T. (2005). Estimating the cost of a new technology intensive automotive product: A case study approach. International Journal of Production Economics, 97(2), pp. 210–226. doi:10.1016/j.ijpe.2004.08.003.
- Oduguwa, V., Tiwari, A. and Roy, R. (2005). Evolutionary computing in manufacturing industry: an overview of recent applications. Applied Soft Computing, 5(3), pp. 281–299. doi:10.1016/j.asoc.2004.08.003.
- Kamiya, A., Ovaska, S.J., Roy, R. and Kobayashi, S. (2005). Fusion of soft computing and hard computing for large-scale plants: a general model. Applied Soft Computing, 5(3), pp. 265–279. doi:10.1016/j.asoc.2004.08.005.
- (2005). Understanding the cognitive behaviour of design engineers: an overview. .
- Shah, S., Roy, R., Tiwari, A. and Majeed, B. (2005). Customised customer support using a soft computing approach. Proceedings - International Conference on Computational Intelligence for Modelling, Control and Automation, CIMCA 2005 and International Conference on Intelligent Agents, Web Technologies and Internet, 1, pp. 939–944.
- Shah, S., Roy, R., Tiwari, A. and Majeed, B. (2005). Customised customer support using a soft computing approach. Proceedings. 2006 International Conference on Intelligence For Modelling, Control and Automation. Jointly with International Conference on Intelligent Agents, Web Technologies and Internet Commerce.
- Shah, S., Roy, R., Tiwari, A. and Majeed, B. (2005). Customised customer support using a soft computing approach. Proceedings. 2006 International Conference on Intelligence For Modelling, Control and Automation. Jointly with International Conference on Intelligent Agents, Web Technologies and Internet Commerce.
- Rios, J., Lopez, A. and Roy, R. (2005). Design requirements change and cost impact: An aerospace perspective. Next Generation Concurrent Engineering: Smart and Concurrent Integration of Product Data, Services, and Control Strategies, CE 2005 pp. 599–604.
- Roy, R., Kerr, C.I.V., Sackett, P.J. and Corbett, J. (2005). Design Requirements Management using an Ontological Framework. CIRP Annals, 54(1), pp. 109–112. doi:10.1016/s0007-8506(07)60061-4.
- Roy, R., Kerr, C.I.V., Sackett, P.J. and Corbett, J. (2005). Design requirements management using an ontological framework. CIRP Annals - Manufacturing Technology, 54, pp. 109–112.
- Roy *, R., Adesola, B.A. and Thornton, S. (2004). Development of a knowledge model for managing schedule disturbance in steel-making. International Journal of Production Research, 42(18), pp. 3975–3994. doi:10.1080/00207540410001716453.
- Roy, R., Allen, D. and Zamora, O. (2004). Cost of photochemical machining. Journal of Materials Processing Technology, 149(1-3), pp. 460–465. doi:10.1016/j.jmatprotec.2004.01.059.
- Makri, C., Roy, R. and Sackett, P.J. (2004). Translating Environmental Legislation into the Engineering Design Domain. SAE Technical Paper Series. doi:10.4271/2004-01-0248.
- (2004). Development of fuzzy expert system for customer and service advisor categorisation within contact centre environment. .
- Oduguwa, V., Tiwari, A. and Roy, R. (2004). Sequential Process Optimisation Using Genetic Algorithms. pp. 782–791. doi:10.1007/978-3-540-30217-9_79.
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). A knowledge-based tool for the selection of design options during the competitive tendering of vehicle systems. Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004, 3, pp. 1–9.
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). A product ontology for automotive seat specification. Proceedings of the ASME Design Engineering Technical Conference, 1, pp. 57–64.
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). Designing through the supply chain - A requirements’ perspective. Proceedings of the 3rd IMechE Automobile Division Southern Centre Conference on: Total Vehicle Technology; Finding the Radical, Implementing the Practical pp. 223–231.
- Kerr, C.I.V., Roy, R. and Sackett, P.J. (2004). Managing design changes and the implications for manufacturing within an automotive supplier. 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2004).
- Jones, P., Tiwari, A., Roy, R. and Corbett, J. (2004). Multi-objective optimisation with uncertainty. Proceedings of the Eighth IASTED International Conference on Artificial Intelligence and Soft Computing pp. 114–119.
- Jones, P.M., Tiwari, A., Roy, R. and Corbett, J. (2004). Optimisation of the high efficiency deep grinding process with fuzzy fitness function and constraints. Proceedings of the 2004 Congress on Evolutionary Computation, CEC2004, 1, pp. 574–581.
- Jones, P.M., Tiwari, A., Roy, R. and Corbett, J. (2004). Optimisation of the high efficiency deep grinding process with fuzzy fitness function and constraints. Proceedings of the 2004 Congress on Evolutionary Computation (IEEE Cat. No.04TH8753).
- Oduguwa, V., Tiwari, A. and Roy, R. (2004). Sequential process optimisation using genetic algorithms. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 3242, pp. 782–791.
- Kerr, C., Roy, R. and Sackett, P. (2004). The electronic-enabling of product specifications for the digital environment of the automotive supply chain. Advances in e-Engineering and Digital Enterprise Technology - I. Proceedings of the Fourth International Conference on e-Engineering and Digital Enterprise Technology pp. 171–178.
- Makri, C., Roy, R. and Sackett, P.J. (2004). Translating environmental legislation into the engineering design domain. SAE Technical Papers.
- Oduguwa, V., Roy, R. and Farrugia, D. (2003). An integrated design optimisation approach for quantitative and qualitative search space. Proceedings of the ASME Design Engineering Technical Conference, 2 B, pp. 1359–1368.
- Wognum, P.M., Jardim-Gonçalves, R., De Graaf, R., Lettice, F. and Roy, R. (2003). Analysis on 10 years of ISPE/CEconf community. Proceedings of the 10th ISPE International Conference on Concurrent Engineering Research and Application, Enhanced Interoperable Systems pp. 1–7.
- Mishra, K., Roy, R., Souchoroukov, P. and Taratoukhine, V. (2003). Knowledge reuse: CE2-focused training. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2569, pp. 595–612.
- Roy, R., Rush, C.S. and Gorroño, V. (2003). Cost Estimating Rationale Capture: Beyond the Aerospace Industry. AACE International. Transactions of the Annual Meeting.
- del‐Rey‐Chamorro, F.M., Roy, R., van Wegen, B. and Steele, A. (2003). A framework to create key performance indicators for knowledge management solutions. Journal of Knowledge Management, 7(2), pp. 46–62. doi:10.1108/13673270310477289.
- Roy, R. (2003). Concurrent Engineering Research and Applications: Guest Editorial. Concurrent Engineering Research and Applications, 11(1), p. 5.
- Roy, R., Tiwari, A. and Corbett, J. (2003). Designing a Turbine Blade Cooling System Using a Generalised Regression Genetic Algorithm. CIRP Annals, 52(1), pp. 415–418. doi:10.1016/s0007-8506(07)60614-3.
- Roy, R., Tiwari, A. and Corbett, J. (2003). Designing a turbine blade cooling system using a generalised regression genetic algorithm. CIRP Annals - Manufacturing Technology, 52, pp. 415–418.
- Roy, R., Bailey, J.I. and Hodges, R.G.L. (2003). Development of a Design Reuse View of Cutting Tool Design Ontology. Volume 2: 29th Design Automation Conference, Parts A and B pp. 349–356. doi:10.1115/detc2003/dac-48738.
- Roy, R. and Amos, G. (2003). Development of an integrated cost model for nuclear plant decommissioning. 10th European Concurrent Engineering Conference 2003. 10th Anniversary Conference.
- Giannopoulos, N., Roy, R., Taratoukhine, V., Sarasua-Echeverria, A. and Griggs, T. (2003). Embedded systems software cost estimating within the concurrent engineering environment. Proceedings of the 10th ISPE International Conference on Concurrent Engineering pp. 353–357.
- Oduguwa, V., Roy, R. and Farrugia, D. (2003). Fuzzy multi-objective optimisation approach for rod shape design in long product rolling. Lecture Notes in Artificial Intelligence (Subseries of Lecture Notes in Computer Science), 2715, pp. 636–643.
- Oduguwa, V., Tiwari, A. and Roy, R. (2003). Handling integrated quantitative and qualitative search space in a real world optimisation problem. 2003 Congress on Evolutionary Computation, CEC 2003 - Proceedings, 2, pp. 1222–1229.
- Roy, R., Souchoroukov, P. and Koponen, H.S. (2003). Information Requirements for Cost Estimating in the Automotive Industry. Volume 3a: 8th Design for Manufacturing Conference pp. 195–204. doi:10.1115/detc2003/dfm-48153.
- Roy, R. and Oduguwa, V. (2003). Multiobjective optimisation of rod design in long product rolling within a quantitative and qualitative search space. Proceedings 2003 IEEE International Symposium on Computational Intelligence in Robotics and Automation. Computational Intelligence in Robotics and Automation for the New Millennium (Cat. No.03EX694).
- Roy, R. (2003). Untitled. CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, 11(1), pp. 5–5. doi:10.1177/106329303032815.
- Roy, R., Jared, G. and Mussa, R. (2002). Curve and surface optimization within the CAD/CAM environment. Journal of Engineering Design, 13(2), pp. 121–139. doi:10.1080/09544820210129797.
- Tiwari, A., Roy, R., Jared, G. and Munaux, O. (2002). Evolutionary-based techniques for real-life optimisation: development and testing. Applied Soft Computing, 1(4), pp. 301–329. doi:10.1016/s1568-4946(02)00022-4.
- Roy, R., Rush, C.S. and Tuer, G. (2002). Cost estimating rationale capture. AACE International. Transactions of the Annual Meeting.
- Roy, R., Jared, G. and Mussa, R. (2002). Curve and surface optimization within the CAD/CAM environment. Journal of Engineering Design, 13, pp. 121–139.
- Roy, R. and Tiwari, A. (2002). Generalised Regression GA for Handling Inseparable Function Interaction: Algorithm and Applications. pp. 452–461. doi:10.1007/3-540-45712-7_44.
- Roy, R. and Tiwari, A. (2002). Generalised regression GA for handling inseparable function interaction: Algorithm and applications. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2439, pp. 452–461.
- Rush, C. and Roy, R. (2001). Expert Judgement in Cost Estimating: Modelling the Reasoning Process. Concurrent Engineering, 9(4), pp. 271–284. doi:10.1177/1063293x0100900404.
- Roy, R., Kelvesjo, S., Forsberg, S. and Rush, C. (2001). Quantitative and qualitative cost estimating for engineering design. Journal of Engineering Design, 12(2), pp. 147–162. doi:10.1080/09544820110038997.
- Rush, C. and Roy, R. (2001). Expert judgement in cost estimating: Modelling the reasoning process. Concurrent Engineering-Research and Applications, 9, pp. 271–284.
- Rush, C. and Roy, R. (2001). Expert judgement in cost estimating: Modelling the reasoning process. Concurrent Engineering Research and Applications, 9, pp. 271–285.
- Roy, R., Kelvesjo, S., Forsberg, S. and Rush, C. (2001). Quantitative and qualitative cost estimating for engineering design. Journal of Engineering Design, 12, pp. 147–162.
- Roy, R. and Rush, C. (2001). Special issue: Cost engineering in CE - Introduct. Concurrent Engineering-Research and Applications, 9, pp. 241–241.
- Roy, R., Palacio, A. and Hayhurst, D.R. (2000). Cost estimating and risk analysis in manufacturing processes. Proceedings of the 33rd International Matador Conference pp. 177–182.
- Roy, R., Cowdry, H., Bryce, S., Perryman, R. and Ellis, C.D. (2000). Developing a modular approach to manufacturing engineering process modelling. Advances in Manufacturing Technology - Xiv pp. 27–32.
- Roy, R., Leibar, I., Perryman, R. and Ellis, C.D. (2000). ERP systems and knowledge management. Advances in Manufacturing Technology - Xiv pp. 21–26.
- Collantes, L., Roy, R., Suzuki, Y., Ovaska, S., Furuhashi, T. and Dote, Y. (2000). Fuzzy process model development with missing data. Soft Computing in Industrial Applications pp. 5–14.
- Roy, R., Chim, D., Khan, F., Nwoyeocha, I.N.C., Robson, D.P., Swainson, A.A.G. … Shen, X. (2000). Software cost estimating: research and practice. Parallel and Distributed Computing and Systems pp. 813–18.
- Roy, R., Collantes, L., Berdou, J., Whittaker, H., Madill, J., Dave, R.N. … Sudkamp, T. (1999). Fuzzy process modelling for secondary steelmaking. 18th International Conference of the North American Fuzzy Information Processing Society - Nafips pp. 864–868.
- Bailey, J.I., Roy, R., Harris, R., Tanner, A., Bramley, A.N., Mileham, A.R. … Owen, G.W. (1999). Knowledge capture in design and manufacturing. Advances in Manufacturing Technology - Xiii pp. 325–329.
- Roy, R., Zarman, F.A., Devey, C., Williams, G., Nahavandi, S. and Saadat, M. (1999). Reusing assembly process planning knowledge through a computer based training tool in aerospace industry. Proceedings of the Second World Manufacturing Congress. WMC 1999. International Symposia on Manufacturing Systems - ISMS’99. Manufacturing Technology - ISMT’99. Manufacturing Management - ISMM’99 pp. 198–203.
- Roy, R., Jared, G., Grau, J.L., Buchanan, T., Sivaloganathan, S. and Shahin, T.M.M. (1998). Adaptive design decision support within CAD. Engineering Design Conference ’98 pp. 255–262.
- Roy, R., Parravani, O., Sehdev, K. and Marjanovic, D. (1998). Distributed design using the internet technology. Proceedings of the 5th International Design Conference Design 98 pp. 99–104.
- Cooper, S.C., Fan, I.S., Roy, R., Sehdev, K., Sivaloganathan, S. and Shahin, T.M.M. (1998). Reuse of machining knowledge in aircraft design. Engineering Design Conference ’98 pp. 263–270.
- Das, S., Roy, R. and Chattopadhyay, A.B. (1996). Evaluation of wear of turning carbide inserts using neural networks. International Journal of Machine Tools and Manufacture, 36(7), pp. 789–797. doi:10.1016/0890-6955(95)00089-5.
- Roy, R. (1996). Assessment of sheet-metal bending requirements using neural networks. Neural Computing & Applications, 4(1), pp. 35–43. doi:10.1007/bf01413868.
- Roy, R., Parmee, I.C. and Fogarty, T.C. (1996). Adaptive restricted tournament selection for the identification of multiple sub-optima in a multi-modal function. Evolutionary Computing. AISB Workshop. Selected Papers pp. 236–56.
- Stelling, M., Roy, R. and Tiwari, A. A Novel Modelling and Optimisation Technique for Business Processes: An Evolutionary Computing Based Approach. pp. 75–85. doi:10.1007/978-3-540-88079-0_8.
- Turner, C. and Tiwari, A. An Exploration of Genetic Process Mining. pp. 199–208. doi:10.1007/978-3-540-88079-0_20.
- Baguley, P., Roy, R. and Watson, J. Cost of Physical Vehicle Crash Testing. pp. 113–121. doi:10.1007/978-1-84800-972-1_10.
- Roy, R., Baguley, P. and Reeve, L. Understanding the Link between Aesthetics and Engineering in Product Design. pp. 155–164. doi:10.1007/978-3-540-69820-3_17.
- Oduguwa, A., Tiwari, A., Roy, R. and Bessant, C. An Overview of Soft Computing Techniques Used in the Drug Discovery Process. pp. 465–480. doi:10.1007/3-540-31662-0_36.
- Kamiya, A., Roy, R., Ovaska, S.J. and Kobayashi, S. Fusion of soft computing and hard computing for large-scale plants: an overview. SMC'03 Conference Proceedings. 2003 IEEE International Conference on Systems, Man and Cybernetics. Conference Theme - System Security and Assurance (Cat. No.03CH37483), 2, pp. 1441–1448. doi:10.1109/icsmc.2003.1244615.
- Nobre, F.S.M., Nakasone, J.J., Palhares, A.G.B., Madrid, M.K. and Roy, R. Fuzzy logic in management control: a case study. Proceedings of the 2000 IEEE Engineering Management Society. EMS - 2000 (Cat. No.00CH37139) pp. 414–419. doi:10.1109/ems.2000.872538.
- Roy, R., Collantes, L., Berdou, J., Whittaker, H. and Madill, J. Fuzzy process modelling for secondary steelmaking. 18th International Conference of the North American Fuzzy Information Processing Society - NAFIPS (Cat. No.99TH8397) pp. 864–868. doi:10.1109/nafips.1999.781817.
- A Proposed Close-Loop Validation and Verification Methodology of Reliability Requirements. .
Professor Rajkumar Roy
Contact details
Address
Professor Rajkumar Roy
C105
, Tait Building [C]
City St George's, University of London
Northampton Square
London EC1V 0HB
United Kingdom
Northampton Square
London EC1V 0HB
United Kingdom
Personal links
About
Overview
Professor Rajkumar Roy joined City from Cranfield University, where he was Director of Manufacturing. Professor Roy holds a PhD in Computing from the University of Plymouth (UK) and BEng and MEng degrees in Production Engineering from Jadavpur University in India.
He started his career as an engineer at Tata Motors; pioneered research in Through-life Engineering Services (TES) with Rolls-Royce, BAE Systems, Bombardier Transportation, the Ministry of Defence and Babcock International; and established an internationally known TES Centre. Professor Roy's cost engineering and obsolescence research has transformed contemporary understanding of the engineering effort required to design, make and support high-value products, resulting in tools used by BAE Systems, Airbus, the Ministry of Defence, Rolls-Royce, and Ford Motor Company.
He is a Founding Editor-in-Chief of the Elsevier Applied Soft Computing journal and a Fellow of the CIRP (International Academy for Production Engineers), the Institute of Engineering Designers (IED), and the Higher Education Academy (HEA).
Professor Roy has advocated creative thinking in higher education and has started several new initiatives over the last twenty years. An initiative was to set up a new Centre for Competitive Creative Design (C4D), this is around £5.5m investment from HEFCE, Cranfield University, UAL and EEDA. The Centre aims to embed design thinking across enterprises to improve their creativity and make them more competitive. This is an initiative to link design with science, technology and management.
Qualifications
- PhD (Computing), University of Plymouth, United Kingdom, 1994 – 1997
- MSc (Intelligent Systems), University of Plymouth, United Kingdom, 1992 – 1993
- M.E. (Production Engineering), Jadavpur University, India, 1990 – 1992
- B.E. (Production Engineering), Jadavpur University, India, 1983 – 1987
Employment
- Dean, City, University of London, Feb 2019 – present
- Director of Manufacturing, Cranfield University, Jul 2014 – Jan 2019
- Director, Operations Excellence Institute, Cranfield University, 2013 – 2016
- Head of Manufacturing and Materials Department, Cranfield University, Jul 2011 – Jun 2014
- Director, The EPSRC Centre for Innovative Manufacturing in Through-life Engineering Services, Cranfield University, 2011 – 2016
- HEFCE REF2014 ‘General Engineering’ Panel member, HEFCE, 2011 – 2014
- Professor, Cranfield University, Oct 2005 – Jan 2019
- Head of Decision Engineering Centre, Cranfield University, Jul 2005 – Jun 2009
- Senior Lecturer, Cranfield University, 2001 – 2005
- Lecturer, Cranfield University, 1998 – 2001
- University Research Fellow, Cranfield University, 1996 – 1998
- Part time lecturer (module leader), University of Plymouth, 1995
- Lecturer, Jadavpur University, 1991 – 1993
- Assistant Engineer, Tata Motors (TELCO), 1987 – 1990
Fellowships
- Fellow (FCILT), CILT, 2015 – present
- Fellow (FIED), Institution of Engineering Designers, 2010 – present
- Fellow (FCIRP), CIRP (International Academy of Production Engineers), 2009 – present
- Fellow (FACostE), Association of Cost Engineers (ACostE), 2002 – present
- Fellow (FHEA), HEA, 2001 – present
Languages
Bengali (can read, write, speak, understand spoken and peer review), English (can read, write, speak, understand spoken and peer review) and Hindi (can speak and understand spoken).
Expertise
Geographic Areas
- Europe
Research
PhD Supervision - COMPLETED
1. Nicolau Morar, Investigating dependencies between laser drilling process parameters, recast layer thickness and corrosion-fatigue life for turbine vane cooling film holes (2018), EPSRC TES Centre (Supervisors: Prof. R. Roy and Prof. Jorn Mehnen).
2. Ebiakpo Kakandar, Study of the dependencies between in-service degradation and key design parameters with uncertainty for mechanical components (2017), EPSRC TES Centre (Supervisors: Prof. R. Roy and Prof. Jorn Mehnen).
3. Caxton Okoh, A framework development to predict remaining useful life of a gas turbine mechanical component (2017), EPSRC TES Centre (Supervisors: Prof. R. Roy and Prof. Jorn Mehnen).
4. Aisha Momo, A framework for complexity cost modelling for ERP implementation (2015) (Supervisors: Dr. Essam Shehab and Prof. R. Roy)
5. Dmitry Borisoglebsky, The development of a framework to embbed cost estimation capability within steel manufacturing simulation environment (2013), Corus (Supervisors: Prof. R. Roy and Dr. Essam Shehab)
6. Panumas Arundachawat, Cost Impact of Design Strategy and Organisation, (2012): Thai Government (Supervisors: Prof. R. Roy and Dr. Ahmed Al-Ashaab)
7. Fran Romero Rojo, The development of a methodology to predict whole life cost of of a product-service system with obsolescence (2011), PSS-Cost Project (IMRC funded) (Supervisors: Prof. R. Roy and Dr. Essam Shehab)
8. Oyetola Bankole, The development of a framework to predict affordability within a product-service system context (2011), PSS-Cost Project (IMRC funded) (Supervisors: Prof. R. Roy and Dr. Essam Shehab)
9. Yoseph Tafesse Azene, Rolling Systems Design Optimisation using Soft Computing Techniques (2011): Corus (Supervisor: Prof. R. Roy)
10. John Erkoyuncu, The development of a framework to incorporate uncertainties and risks in service and support costs within a product-service system (2011), PSS-Cost Project (IMRC funded) (Supervisors: Prof. R. Roy and Dr. Essam Shehab)
11. Nancy Doultsinou, The development of a framework for service knowledge capture and reuse for conceptual design (2010), UKNOW Project (IMRC funded) (Supervisor: Professor R. Roy)
12. Sara Mountney, Acquisition and sharing of innovative manufacturing knowledge for preliminary design (2009), Rolls-Royce funded. (Supervisors: Prof. R. Roy and Prof. James Gao)
13. Gokop Goteng, Grid Computing Enabled Engineering Design Optimisation within an Extended Enterprise (2009): PTDF (Nigeria) (Supervisors: Dr. A. Tiwari and Prof. R. Roy)
14. Mark Stelling, Business Process Optimisation (2008): BT (Supervisors: Dr. R. Roy and Dr. A. Tiwari)
15. John Hadden, Development of a Soft Computing Based Framework for Churn Management (2008): BT (Supervisors: Dr. A. Tiwari and Dr. R. Roy).
16. Evaggelos Lavdas, Development of a systematic approach to Cost Engineering Knowledge Capture (2008): Airbus, Smiths Group and Galorath (Supervisors: Dr. C. Wainwright and Dr. R. Roy).
17. Satya Shah, Intelligent Decision Support in Contact Centres (2007): BT (Supervisors: Dr. R. Roy and Dr. A. Tiwari).
18. Pius Achanga, The methodology for quantifying the benefits of Lean manufacturing application within SMEs (2007): MASEAST (Supervisors: Dr. E. Shehab and Dr. R. Roy).
19. Nikos Giannopoulos, Electronic Part Cost Estimating (2006): Ford Motor Company (Supervisor: Dr. R. Roy).
20. Patrick Oduguwa, Cost Impact Analysis for Requirements Management (2006): Nissan European Technology Centre Europe, Johnson Controls – Automotive, EDS and SMMT (Supervisor: Dr. R. Roy).
21. Daniel Ling, Cost Estimating for Railway Track maintenance (2005): Corus UK (Supervisors: Prof. R. Roy and Dr. E. Shehab).
22. Dnyanesh Rajpathak, A Generic Library of Problem Solving Methods for Scheduling Applications (2004): Jointly with Open University.
23. Petros Souchoroukov, Improvement of Cost Estimating Internal Practice (2004): ICOST (Supervisor: Dr. R. Roy)
24. Victor Oduguwa, Integration of Quantitative and Qualitative Knowledge in Design Optimisation (2003): Corus (Supervisor: Dr. R. Roy)
25. Jesse Ian Bailey, Cutting Tool Design Knowledge Capture & Reuse (2003): Widia Valenite (Supervisor: Dr. R. Roy)
26. Christopher Rush, Formalisation and Reuse of Cost Engineering Knowledge (2003): BAE SYSTEMS (Supervisor: Dr. R. Roy)
27. Benjamin Adesola, A knowledge model for decision support to manage schedule disturbance in steelmaking (2002): Corus UK (Supervisor: Dr. R. Roy)
28. Ashutosh Tiwari, Evolutionary computing techniques for handling variable interaction in engineering design optimisation (2001): Nissan Technology Centre Europe and SDRC (Supervisor: Dr. R. Roy)
Grants obtained/Industrial Funding:
2018 – 2022 Principal Investigator (PI) of Cranfield part of ATI/Innovate UK funded project on “Digital Through-life Engineering Services (TES) (Appl. No: 103082-263289). Lead: Rolls-Royce. Financial cont.: £589K
2018-2021 PI of BAE Systems Masterships (PGDip in Engineering Competence) course. Financial contribution: £2.73m 2018 – 2021 PI of EPSRC GCRF Grant on ‘Distributed Intelligent Ultrasound Imaging System for Secure in-community Diagnostics (SecureUltrasound)’ (EP/R013950/1). Core partners are IISc, NIAS and SJRI from India. Financial cont.: £1m (EPSRC).
2017 – 2022 PI of EPSRC Platform Grant on ‘Through-life Performance – From Science to Instrumentation’ (EP/P027121/1). Core partners include Nottingham University, Rolls-Royce, Bombardier Transport, Network Rail, SMD, HVM Catapult and XP School. Financial cont.: £1.3m cash (EPSRC+Industry) + £1m in kind from industry (3rd April 2017 start).
2017 – 2019 Co-Investigator (Co-I) on Innovate UK project on ‘Metrology and Digital Manufacturing for Servitisation of Manufacturing Machines’ (Grant Ref: 102787) Financial cont: £102K (baseline approval so far)
2017 – 2022 PI of Atkins-Cranfield Chair – Contributions from Atkins Financial cont: £250K
2017 PI of MSc Group Project on ‘Die Life Improvement’ Financial cont: Royal Mint - £42.5K (3 months)
2017 – 2019 PI of KTP Project on (Design Rule Ltd. and Cranfield University) PLM, IoT and Big Data management for through-life support (KTP 010558) Financial cont: Innovate UK+EPSRC - £280.3K
2016 – 2018 Cranfield PI on EC project ‘Scoreboard of Competitiveness of European Transport Manufacturing Industry’ (EC 724112) Financial cont: £150K
2016 – 2017 Principal Investigator of Rolls-Royce funded project on ‘Optimum cost by design’ Financial cont: £70K
2016- 2017 Co-I of Innovate UK project on ‘Automation of Cell Therapy Cryostorage Processes and Future Manufacturing Facilities’ (EP/N508937/1) Financial cont: £160K
2013 – 2015 Principal Investigator of MoD funded project on ‘Support to Total Obsolescence Management Capability Assessment Tool’. Financial cont: £240K
2013 – 2016 Principal Investigator of the HEFCE funded Operations Excellence Institute, Core partners include Rolls-Royce, SEMLEP, Kimberley College, Hertfordshire University. Financial cont.: £6m (including £3m from HEFCE, rest in find from industry and partners)
2011 – 2016 Principal Investigator of the EPSRC Centre for Innovative Manufacturing in Through-life Engineering Services. Core partners include Durham University, Rolls-Royce, Bombardier Transport, BAE Systems and MoD. Financial cont.: £11.1 m (including £7.5m cash from EPSRC and Industry, £3m from industry in kind)
2011 – 2015 Principal Investigator of VISIONAIR EU project (Grant Agreement Number 262044). Financial cont.: £345K
2010 – 2012 Principal Investigator of MoD funded ‘Obsolescence Management Improvement’ project. Financial cont.: £200K
2010 – 2013 Principal Investigator of Rolls Royce/TSB/EPSRC funded project ‘SAMULET: maintenance cost prediction using component life prediction’ (Jointly with Dr. Jorn Mehnen) Financial cont.: £270K
2009 – 2012 Co-Investigator of EPSRC Knowledge Transfer Account – Service and Support Solutions (EP/H500200/1) (led by Cambridge University). Financial Cont.: £217K + one KTP with Rolls Royce on Design for Service
2008 – 2011 Principal Investigator of IMRC project “Capability based PSS conceptual design”. (Jointly with 8 other academics). Astrium and GSI Group Financial cont.: £384K
2008 – 2011 Principal Investigator of HEFCE Grant “Centre for Competitive Creative Design” (Jointly with Professor Tom Stephenson, Mike Goatman and Ian Ferris, Mike Bradshaw) Nissan Technology Centre Europe, Corus, and 9 others Financial cont.: £3.46 million (shared with the University of the Arts London)
2008 – 2010 Principal Investigator of EPSRC/BAE Systems funded project “Risk and Cost Modelling of Capability Contracts” within the ‘Service and Support Solutions: Strategy and Transition (S4T)”. (Jointly with 3 other universities). Financial Cont.: £175K
2007 – 2010 Principal Investigator of IMRC funded project “Whole Life Cost Modelling for Product-Service Systems” (Jointly with Dr. Essam Shehab) BAE Systems, GE Aviation, Lockheed Martin (Insys), MoD, Rolls Royce, Galorath, APMP, SBAC Financial Cont.: ~£380K + + £75K from Industry + in-kind support
2007 – 2009 Principal Investigator of IMRC funded project “PSS Futures Lab”. Financial Cont.: £100K
2005 – 2008 Principal Investigator of IMRC funded project “Unification of Design, Manufacturing Capability and Service Knowledge in Collaborative Product Development” (Jointly with Professor James Gao). Rolls-Royce, BOC Edwards Financial cont.: ~ £298K + 40K (industrial contribution) + in kind contribution.
2005 Cost Engineering Awareness Development Training for AMS Engineers. Jointly with Dr. Paul Blackwell. Financial Cont. from Industry: £50K (approx.)
2005 – 2008 Principal Investigator of IMRC funded Network of Excellence in “Affordability Engineering”, jointly with Dr. Paul Blackwell and Dr. Ashutosh Tiwari 11 partners across UK and abroad. Financial Cont.: £94K from IMRC and £12K from Industry.
2004-2005 HEIF II Funding for Cost Engineering training and COST STUDIO development (jointly with Dr. Paul Blackwell) Financial cont: £6K
2004– 2006 Principal Investigator of EU F6 SSA Proposal “Virtual Cost Engineering Studio (V-CES)” Five partners across Europe, Cranfield is the Technical Leader Financial Cont. from EU: £304.5K over the two years
2004 Consultancy on ‘Evaluation of Risk Analysis Software’, PFG/MoD. Financial Contribution: £10K
2003 - 2006 Principal Investigator of IMRC/EPSRC Proposal (IMRC 32) “Formalisation of Expert Judgement in Cost Engineering and Integration (Cost Expert)” (Jointly with Dr. C. Wainwright) Airbus UK, Galorath UK and Smiths Group Financial Cont.: £221.7K + £100K (from industry) Total: £805K (including kind cont.)
2003 – 2006 Teaching Company Scheme with Airbus (Dr. C. Wainwright is the PI). FOUR Associates. Financial Contribution: £400K
2003-2005 CTES Scholars (Jointly with Dr. Ashutosh Tiwari, PI): four + three Researchers for 9 months. Financial Contributions: £35K
2002 – 2005 Industry Funded studentships on “Electronic Part Cost Estimating” (one PhD for three years and one MSc by Research for one year) (Ford Motor Company) Financial Cont.: £128K
2002 – 2005 Principal Investigator of IMRC/EPSRC Proposal (IMRC 21) “Integrated Requirements Management for Digital Product Development (e-RM)” Nissan Technology Centre Europe, JCA, EDS and SMMT Financial Cont.: £317K Total: £907K (incl kind cont.)
2002–2005 IMS Project on “A standards-compliant framework to support complete integrated product life-cycle information management and electronic commerce for the furniture manufacturing (fm) industry, in the advent of smart enterprises.” Proposal/Contract no.: IST-2001-5224 Financial Cont.: 25K
2001 – 2003 Thematic Network proposal on "European Network on Intelligent Technologies for Smart Adaptive Systems", IST Research Programme (ELITE Foundation, Germany as the main contractor). Contract Number: IST-2000-29207.
2001 - 2004 Principal Investigator (jointly with Professor C. P. Thompson and Professor Philip John) EPSRC Masters Training Package on 'Information Technology for Product Realisation' (GR/N 30545) BAE SYSTEMS, BOC Edwards, LSC Group, SAP (UK) + 9 other companies Financial Cont.: £343K Total: £637.5K (including in kind support)
2000 - 2001 Principal Investigator of EPSRC Proposal (GR/N21321) “Developing an Integrated Costing Approach for Conceptual Design Evaluation (ICOST)" (Completed) BAe MA&A, Ford and XR Associates Financial Cont.: £275K Total: £575K (including in kind cont.)
2000-2008 Funding for TWO EngD + THREE Industry CASE PhD Studentships + ONE CASE Studentship + ONE DTA PhD Studentship (Sponsored by CORUS, BAE SYSTEMS, Widia Valenite and BT) Financial Cont.: £450K (approx.)
2000 - 2005 MSc by Research (p-t) with Ford (specialising in Cost Engineering) Existing Commitment: 9 students Financial Contribution: £165K
2000 - 2005 MSc by Research (p-t) with MoD (specialising in Cost Engineering) Existing Commitment: 6 students Financial Contribution: £110K
1999 – 2002 Principal Investigator of EPSRC Project (GR/M 71473) (jointly with Graham Jared) (Completed) 'Flexible Design Optimisation within the CAD/CAM Environment' Nissan European Technology Centre and SDRC Financial Cont.: £180K Total: £545 K (including in kind cont.)
1999 Leading Cranfield University side on 'COGENT Next Steps' project with Nissan Technology Centre - Europe. Commitment: One MSC by Research student
1996 - 2010 Various: Industrial Contract Research, Consultancy, 50 MSc Individual projects (around 6K each), ten MSc Group Projects (around 35K each), four full time MSc by Research projects (around 10K each) Financial Cont.: £700K (approx.)
Professional activities - international and national
2019 Joint Chair of the CIRP General Assembly 2019 in
Birmingham (a major International Conference over 5 days,
with over 500 academics from around the World).
2017-2023 Editorial Board member of the CIRP Annals.
2017 Instrumental in developing a TES National Strategy and
have launched a national level TES Council (Chaired: Sam
Turner, CTO, HVM Catapult).
2017 ATI Strategy Group on TES
2016 Trustee of Harpur Trust Schools and Governor of Bedford
School
2015 Fellow of CILT
2012 Trustee of CIRP UK Ltd
2012-15 Chairman of CIRP UK
2011-14 External Examiner for the Manufacturing Courses in the
School of Engineering, Warwick University
2011 Invited to the HEFCE REF2014 ‘General Engineering’ Panel 2010 Invited to the IET Manufacturing Policy Panel and NTC on
Advanced Design and Manufacturing
2010 Fellow of the Institution of Engineering Designers 2009
Fellow of the CIRP (The International Academy for
Production Engineering)
2008 President, ACostE (completed on the 6th of October 2010) 2008 Invited as the Fellow of the Royal Society for the
encouragement of Arts, Manufactures & Commerce (RSA)
2007 Elected/Selected as the Technical Secretary for the CIRP
Working Group on ‘Industrial Product-Service Systems
(IPS2)’.
2007 Elected as a Vice-President of the ACostE.
2005 Nominated as the Corresponding Member of the
International Institution for Production Engineering Research
(CIRP)
2005 Elected as the Chairman of Engineering and Manufacturing
Committee of ACostE
2004 Elected as the Board member of the International Society for
Productivity Improvement (ISPE)
2002 Elected as the Chairperson of the World Federation on Soft
Computing (WFSC)
2002 Elected to the ACostE Council
2001 Member of the Institute for Learning and Teaching (ILT)
Member of the Association of Cost Engineers (ACostE)
Chartered Engineer (CEng) Member of the Institution of
Engineering Designers (IED) Member of the Institution of
Electrical and Electronics Engineering (IEEE) and IEEE
Computer Society
1992 Life Member of the Institution of Engineers (India)
Publications
Publications by category
Books (22)
- Redding, L. and Roy, R. (Eds.), (2015). Through-life Engineering Services. Springer International Publishing. ISBN 978-3-319-12110-9.
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). Designing through the supply chain - a requirements’ perspective. Childs, P.R.N.S.R.K. (Ed.),
- Roy, R., Kerr, C., Makri, C. and Kritsilis, D. (2004). Documenting technical specifications during the conceptualisation stages of aeroengine product development. Marjanovic, D. (Ed.),
- Jones, P.M., Roy, R. and Corbett, J. (2004). Modelling physical systems using fuzzy inference cognitive maps. Dick, S.K.L.M.P.P.W. (Ed.),
- Jones, P., Tiwari, A., Roy, R. and Corbett, J. (2004). Multi-objective optimisation with uncertainty. DelPobil, A.P. (Ed.),
- Roy, R., Kerr, C. and Sackett, P. (2004). Requirements management: a pillar of concurrent engineering. Sobolewski, M.C.J. (Ed.),
- Kerr, C., Roy, R. and Sackett, P. (2004). The electronic-enabling of product specifications for the digital environment of the automotive supply chain. Cheng, K.W.D.M.R. (Ed.),
- Roy, R. and Amos, G. (2003). Development of an integrated cost model for nuclear plant decommissioning. Baake, U.H.J.G.I. (Ed.),
- Giannopoulos, N., Roy, R., Taratoukhine, V., Sarasua-Echeverria, A. and Griggs, T. (2003). Embedded systems software cost estimating within the concurrent engineering environment.
- Oduguwa, V., Tiwari, A., Roy, R. and Ieee, (2003). Handling integrated quantitative and qualitative search space in a real world optimisation problem.
- Roy, R., Oduguwa, V. and Ieee, (2003). Multi-objective optimisation of rod design in long product rolling within a quantitative and qualitative search space.
- Sarasua, A., Roy, R., Taratoukhine, V. and Giannopoulos, N. (2003). Printed circuit board design and manufacturing cost estimation - the challenges. Qin, Y.J.N. (Ed.),
- Oduguwa, V., Roy, R., Zakharevich, V.G. and Kureichik, V.M. (2002). Bi-level optimisation using genetic algorithm.
- Oduguwa, V. and Roy, R. (2002). Bi-level optimisation using genetic algorithm. Zakharevich, V.G.K.V.M. (Ed.),
- Bailey, J.I. and Roy, R. (2002). Feeding back designer knowledge - a matrix approach. Shahin, T.M.M. (Ed.),
- Roy, R., Tiwari, A. and Braneby, A. (2002). Making evolutionary design optimisation popular in industry: Issues and techniques. Roy, R.K.M.O.S.F.T.H.F. (Ed.),
- Oduguwa, V., Roy, R., Watts, G., Wadsworth, J. and Farrugia, D. (2001). Comparison of low-cost response surface models for rod rolling design problem. Cheng, K.W.D. (Ed.),
- Oduguwa, V., Roy, R., Watts, G., Wadsworth, J. and Farrugia, D. (2001). Comparison of low-cost response surface models for rod rolling design problem. Cheng, K.W.D. (Ed.),
- Roy, R., Ugarte, D. and Fletcher, E. (2001). Digital product development and UKSMEs - a capability assessment. Pham, D.T.D.S.S.O.V. (Ed.),
- Giannopoulos, N., Taratoukhine, V. and Roy, R. (2001). Integration of Enterprise Resource Planning (ERP) and Cost Estimating (CE) systems - The challenges. Cheng, K.W.D. (Ed.),
- Oduguwa, V. and Roy, R. (2001). Quantitative and qualitative knowledge in engineering systems design. Pham, D.T.D.S.S.O.V. (Ed.),
- Jones, P.M., Tiwari, A., Roy, R. and Corbett, J. Optimisation of the high efficiency deep grinding process with fuzzy fitness function and constraints. IEEE.
Chapters (19)
- Palmarini, R., del Amo, I.F., Ariansyah, D., Erkoyuncu, J.A. and Roy, R. (2023). Augmented Reality for Remote Assistance (ARRA). Springer Handbooks (pp. 669–685). Springer International Publishing. ISBN 978-3-030-67821-0.
- Zhao, Y., Du, W., Tinsley, L., Addepalli, S., Mehnen, J. and Roy, R. (2022). Damage assessment of composites based on non-destructive pulsed thermographic inspection. Composites Assembly for High Performance Fastener-less Structures (pp. 575–592).
- del Amo, I.F., Erkoyuncu, J. and Roy, R. (2021). An Augmented Reality System Model for Integration with Maintenance Information Systems. Manufacturing in the Era of 4th Industrial Revolution (pp. 73–101). World Scientific.
- Roy, R. (2015). FOREWORD. ARTIFICIAL NEURAL SYSTEMS: PRINCIPLE AND PRACTICE (pp. I–II). ISBN 978-1-68108-091-8.
- Roy, R., Erkoyuncu, J.A. and Shaw, A. (2013). The Future of Maintenance for Industrial Product-Service Systems. Lecture Notes in Production Engineering (pp. 1–15). Springer Berlin Heidelberg. ISBN 978-3-642-30819-2.
- Zhao, Y., Harrison, A., Roy, R. and Mehnen, J. (2011). Aircraft Engine Component Deterioration and Life Cycle Cost Estimation. Glocalized Solutions for Sustainability in Manufacturing (pp. 657–662). Springer Berlin Heidelberg. ISBN 978-3-642-19691-1.
- Bankole, O.O., Roy, R., Shehab, E. and Cheruvu, K. (2010). An Affordability Prediction System to Assess Information Availability in Defence Projects. In Huang, G.Q., Mak, K.L. and Maropoulos, P.G. (Eds.), Proceedings of the 6th Cirp-Sponsored International Conference on Digital Enterprise Technology (pp. 1613–1626).
- Yu, T., Davis, L., Baydar, C. and Roy, R. (2008). Evolutionary Computation in Practice Preface. EVOLUTIONARY COMPUTATION IN PRACTICE (pp. XI–XI).
- Shah, S., Roy, R. and Tiwari, A. (2006). Development of Fuzzy Expert System for Customer and Service Advisor Categorisation within Contact Centre Environment. Advances in Intelligent and Soft Computing (pp. 197–206). Springer Berlin Heidelberg. ISBN 978-3-540-29123-7.
- Houseman, O. and Roy, R. (2006). Understanding Decision Making in Cost Engineering Using Protocol Analysis. (pp. 707–714).
- Oduguwa, V., Tiwari, A. and Roy, R. (2004). Sequential process optimisation using Genetic Algorithms. In Yao, X.B.E.L.J.A.S.J.M.J.J.B., Ja, and Rowe, J.T.P.K.A.S.H.P. (Eds.), Parallel Problem Solving from Nature - Ppsn Viii (pp. 782–791).
- Oduguwa, V., Roy, R. and Farrugia, D. (2003). Fuzzy Multi-objective Optimisation Approach for Rod Shape Design in Long Product Rolling. Lecture Notes in Computer Science (pp. 636–643). Springer Berlin Heidelberg. ISBN 978-3-540-40383-8.
- Mishra, K., Roy, R., Souchoroukov, P. and Taratoukhine, V. (2002). Knowledge reuse: CE2-focused training. In Karagiannis, D.R.U. (Ed.), Practical Aspects of Knowledge Management (pp. 595–612).
- Roy, R. and Rush, C. (2001). Introduction. (pp. 241–241). SAGE Publications.
- Collantes, L., Roy, R., Madill, J., John, R. and Birkenhead, R. (2000). Steelmaking process evaluation using a fuzzy expert system. Soft Computing Techniques and Applications (pp. 231–237).
- Roy, R., Bendall, D., Taylor, J.P., Jones, P., Madariaga, A.P., Crossland, J. … Vandorpe, D. (1999). Identifying and capturing the qualitative cost drivers within a concurrent engineering environment. Advances in Concurrent Engineering: Ce99 (pp. 39–48).
- Torre, I.J.M., Roy, R., Chawdhry, P.K., Ghodous, P. and Vandorpe, D. (1999). Performance measurement systems in IT services. Advances in Concurrent Engineering: Ce99 (pp. 66–75).
- Roy, R., Kerr, C.I.V. and Sackett, P.J. Requirements Management for the Extended Automotive Enterprise. Springer Series in Advanced Manufacturing (pp. 269–279). Springer-Verlag. ISBN 1-84628-004-4.
- Oduguwa, V., Tiwari, A. and Roy, R. Genetic Algorithm in Process Optimisation Problems. Advances in Soft Computing (pp. 323–333). Springer-Verlag. ISBN 3-540-25726-8.
Conference papers and proceedings (129)
- Morar, N.I., Holtham, N., Hackel, L., Davami, K., Sharma, M., DeWald, A. … Roy, R. (2024). Effects of high energy laser peening followed by pre-hot corrosion on stress relaxation, microhardness and fatigue life and strength of single crystal nickel CMSX-4® superalloy. doi:10.1016/j.prostr.2024.03.069
- Boiarkin, V., Zarpelao, B.B., Rajarajan, M., Roy, R. and Tapper, K. (2023). Local Differential Privacy-Based Data-Sharing Scheme for Smart Utilities. doi:10.3233/atde230930
- Kosari, A., Popov, P. and Roy, R. (2022). Modelling Safety of Connected and Autonomous Vehicles (CAVs) under Cyber-Attacks on Perception and Safety Monitors. 2022 12th International Conference on Dependable Systems, Services and Technologies (DESSERT) 9-11 December. doi:10.1109/dessert58054.2022.10018781
- Shakibaei, B.H., Flusser, J., Zhao, Y., Erkoyuncu, J.A. and Roy, R. (2021). DCT/IDCT Filter Design for Ultrasound Image Filtering. 2020 25th International Conference on Pattern Recognition (ICPR) 10-15 January. doi:10.1109/icpr48806.2021.9412838
- Brooks, S. and Roy, R. (2021). Complexity of self-engineering systems across the life cycle – Biological and engineering systems. doi:10.1016/j.procir.2021.01.016
- Turner, C.J., Emmanouilidis, C., Tomiyama, T., Tiwari, A. and Roy, R. (2020). Intelligent Decision Support for Maintenance: A New Role for Audit Trails. doi:10.1007/978-3-030-48021-9_44
- Roy, R. and Brooks, S. (2020). Self-engineering – Technological Challenges. doi:10.1007/978-3-030-46817-0_2
- Wang, J., Erkoyuncu, J. and Roy, R. (2018). A Conceptual Design for Smell Based Augmented Reality: Case Study in Maintenance Diagnosis. doi:10.1016/j.procir.2018.09.067
- Vrabič, R., Erkoyuncu, J.A., Butala, P. and Roy, R. (2018). Digital twins: Understanding the added value of integrated models for through-life engineering services. doi:10.1016/j.promfg.2018.10.167
- Du, W., Zhao, Y., Roy, R., Addepalli, S. and Tinsley, L. (2018). A review of miniaturised Non-Destructive Testing technologies for in-situ inspections. doi:10.1016/j.promfg.2018.10.152
- Castelluccio, G.M. and Roy, R. (2018). Foreword. doi:10.1016/j.promfg.2018.10.149
- Morar, N.I., Roy, R., Gray, S., Nicholls, J. and Mehnen, J. (2018). Modelling the influence of laser drilled recast layer thickness on the fatigue performance of CMSX-4. doi:10.1016/j.promfg.2018.10.173
- Tedeschi, S., Mehnen, J. and Roy, R. (2017). IoT security hardware framework for remote maintenance of legacy machine tools. ICC '17: Second International Conference on Internet of Things, Data and Cloud Computing. doi:10.1145/3018896.3018938
- Tedeschi, S., Emmanouilidis, C., Farnsworth, M., Mehnen, J. and Roy, R. (2017). New Threats for Old Manufacturing Problems: Secure IoT-Enabled Monitoring of Legacy Production Machinery. doi:10.1007/978-3-319-66923-6_46
- Roy, R. and Rios, J. (2016). Virtual cost engineering studio (V-CES): A framework for Cost Engineering services. doi:10.1109/ITMC.2005.7461310
- Zhao, Y., Mehnen, J., Xu, W., Alrashed, M., Abineri, S. and Roy, R. (2015). Degradation Assessment of Industrial Composites Using Thermography. doi:10.1016/j.procir.2015.07.045
- Sabaei, D., Erkoyuncu, J. and Roy, R. (2015). A Review of Multi-criteria Decision Making Methods for Enhanced Maintenance Delivery. doi:10.1016/j.procir.2015.08.086
- Okoh, C., Roy, R., Mehnen, J., Redding, L. and Harrison, A. (2014). Development of an Ontology for Aerospace Engine Components Degradation in Service. International Conference on Knowledge Engineering and Ontology Development 21-24 October. doi:10.5220/0005090201080119
- Erkoyuncu, J.A., Ononiwu, S. and Roy, R. (2014). Mitigating the Risk of Software Obsolescence in the Oil and Gas Sector. doi:10.1016/j.procir.2014.07.133
- Parekh, S., Roy, R. and Baguley, P. (2014). Design and manufacturing uncertainties in cost estimating within the bid process: Results from an industry survey.
- Eker, O.F., Skaf, Z., Camci, F. and Jennions, I.K. (2014). State-based Prognostics with State Duration Information of Cracks in Structures. doi:10.1016/j.procir.2014.07.128
- Tasker, P., Shaw, A. and Kelly, S. (2014). Standards for Engineering Services. doi:10.1016/j.procir.2014.07.153
- Elnadi, M. and Shehab, E. (2014). A Conceptual Model for Evaluating Product-service Systems Leanness in UK Manufacturing Companies. doi:10.1016/j.procir.2014.07.132
- Roy, R. (2014). Foreword.
- (2013). Characterisation of ’In-service’ Feedback for System Design and Manufacture.
- Hockley, C.J. (2013). Wind Turbine Maintenance and Topical Research Questions. doi:10.1016/j.procir.2013.07.075
- Erkoyuncu, J.A., Bolshchikov, S., Steenstra, D., Rajkumar, R. and Dori, D. (2013). Constructing and Evaluating “as-is” and “to-be” OPM Models for the Healthcare Sector for Adoption of Vscan. doi:10.1016/j.procs.2013.01.043
- N.Morar, , Roy, R., Mehnen, J., Redding, L.E. and Harrison, A. (2013). Data Mining and Knowledge Reuse for the Initial Systems Design and Manufacturing: Aero-engine Service Risk Drivers. doi:10.1016/j.procir.2013.08.002
- (2011). Challenges in digital feedback of through-life engineering service knowledge to product design and manufacture.
- Suardi, S., Roy, R., Mehnen, J. and Azene, Y.T. (2011). Uncertainty based evolutionary optimisation. GECCO '11: Genetic and Evolutionary Computation Conference. doi:10.1145/2001858.2001909
- Fernandes, P., Roy, R., Mehnen, J. and Harrison, A. (2011). An Overview on Degradation Modelling for Service Cost Estimation. doi:10.1007/978-3-642-19689-8_54
- Sanya, I., Shehab, E., Roy, R., Houseman, O. and Jonik, M. (2011). Semantic Knowledge Based Approach for Product Maintenance Support. doi:10.1007/978-3-642-15973-2_8
- Vasantha, G.V.A. and Roy, R. (2011). Conceptual product-service system cad- A n application.
- Bankole, O.O., Roy, R., Shehab, E. and Cheruvu, K. (2010). An Affordability Prediction System to Assess Information Availability in Defence Projects. doi:10.1007/978-3-642-10430-5_121
- (2010). Product-Service Systems across Industry Sectors: Future Research Needs and Challenges.
- Arundachawat, P., Roy, R. and Al-Ashaab, A. (2010). Estimation design rework efforts in the early phase of design and development. doi:10.1007/978-0-85729-024-3_61
- Yoseph, A.T. and Rajkumar, R. (2010). Multi-Stage, Multi-Objective Process Optimisation.
- (2009). Through-life integration using PLM.
- Xu, Y., Roy, R., Cassaro, G. and Ramsden, J. (2009). Development of a Cost Estimating Framework for Nanotechnology Based Products. doi:10.1007/978-1-84882-762-2_18
- Roy, R., Roy, R., Datta, P., FJ, R.R. and Erkoyuncu, J. (2009). Cost of industrial product-service systems (IPS2).
- (2009). Affordability Assessment of Industrial Product-Service System in the Aerospace Defence Industry.
- (2009). A Methodology for Variability Reduction in Manufacturing Cost Estimating in the Automotive Industry based on Design Features.
- (2009). Work Roll Cooling System Design Optimisation in Presence of Uncertainty using New Robust Dominance Criteria.
- (2009). Service and manufacturing knowledge in product-service systems: a case study.
- Butterfield, J., Ng, I., Roy, R. and McEwan, W. (2009). ENABLING VALUE CO-PRODUCTION IN THE PROVISION OF SUPPORT SERVICE ENGINEERING SOLUTIONS USING DIGITAL MANUFACTURING METHODS.
- (2008). A life cycle model for Product-Service Systems design.
- (2008). Key service issues in two UK manufacturing companies from a pss perspective.
- (2007). A novel modelling & optimisation technique for business processes: An evolutionary computing based approach.
- (2007). Identification of Service Knowledge Types for Technical Product-Service Systems.
- (2007). Specifying a manufacturing knowledge reuse framework.
- (2007). Challenges In Enterprise Resource Planning (ERP) Phased Approach Implementation Within A Large Organisation: A Case Study.
- (2007). Technical Product-Service System: Business Models For High Precision Machine Tool Manufacturers.
- Mehnen, J., Roy, R., Kersting, P. and Wagner, T. (2007). ICSPEA. GECCO07: Genetic and Evolutionary Computation Conference. doi:10.1145/1276958.1277369
- (2007). Multi-objective Evolutionary Algorithms Applied to Machining of Materials with Dynamically Changing Properties.
- Rios, J., Roy, R., Planas, D., Cochi, F., Shermon, D. and Razzaq, S. (2006). A process centred virtual approach to support cost estimating along product life cycle. 2006 IEEE International Technology Management Conference (ICE) 26-28 June. doi:10.1109/ice.2006.7477050
- Lavdas, E., Roy, R. and Wainwright, C. (2006). Identifying the key factors affecting the quality of a cost estimate.
- (2006). Development of an intelligent customised service system for contact centres.
- (2006). Product-Service Systems: Issues and Challenges.
- Stelling, M., Roy, R., Tiwari, A. and Majeed, B. (2006). A coding mechanism for business process optimisation using genetic algorithms: Initial thoughts.
- (2006). Design of Lean Implementation Based on Cost Analysis.
- Oduguwa, A., Tiwari, A., Fiorentino, S. and Roy, R. (2006). Multi-objective optimisation of the protein-ligand docking problem in drug discovery. GECCO06: Genetic and Evolutionary Computation Conference. doi:10.1145/1143997.1144287
- (2006). Return of Investment Duration for Lean Manufacturing within SMEs.
- Achanga, P., Shehab, E., Roy, R. and Nelder, G. (2005). Lean manufacturing for SMEs: Enabling rapid response to demand changes.
- (2005). Virtual Cost Engineering Studio (V-CES): the challenges of a Just In time service for cost engineering professionals.
- (2005). Development of Fuzzy Expert System for Customer and Service Advisor Categorisation within Contact Centre Environment.
- (2005). Lean Manufacturing for SMEs: enabling rapid response to demand changes.
- Rios, J., Lopez, A. and Roy, R. (2005). Design requirements change and cost impact: An aerospace perspective.
- (2005). A rule based cost estimating approach for design requirement changes.
- (2005). Cost Estimating Knowledge Capture: a Novice Based Approach.
- (2005). Railway Asset Maintenance and Renewal Cost Estimation Challenges.
- (2005). Lean Manufacturing to Improve Cost-Effectiveness of SMEs.
- (2005). Design Requirements Management: a new perspective.
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). A Product Ontology for Automotive Seat Specification. ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 28 Sep 2004 – 2 Oct 2004. doi:10.1115/detc2004-57071
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). A Knowledge-Based Tool for the Selection of Design Options During the Competitive Tendering of Vehicle Systems. ASME 7th Biennial Conference on Engineering Systems Design and Analysis 19-22 July. doi:10.1115/esda2004-58044
- Jones, P.M., Roy, R. and Corbett, J. (2004). Modelling physical systems using fuzzy inference cognitive maps. IEEE Annual Meeting of the Fuzzy Information, 2004. Processing NAFIPS '04. 27-30 June. doi:10.1109/nafips.2004.1337357
- (2004). Documenting technical specifications during the conceptualisation stages of aeroengine product development.
- Jones, P., Tiwari, A., Roy, R. and Corbett, J. (2004). Multi-objective optimisation with uncertainty.
- (2004). Workflow Model of Requirements Management Documents in the Automotive Extended Enterprise.
- (2004). An Overview of Soft Computing Techniques Used in the Drug Discovery Process.
- (2004). Overview of Soft Computing Techniques in Lead Identification and Optimization for the Drug Discovery Process.
- (2004). ’The Assignment of Product Specification Responsibilities for Automotive System Development’.
- (2004). Impact of Requirement Changes on Automotive Product Development.
- Kerr, C., Roy, R. and Sackett, P. (2004). The electronic-enabling of product specifications for the digital environment of the automotive supply chain.
- (2004). Requirements management: A pillar of concurrent engineering.
- (2004). The Integration of specification management in the digital product development environment for supply chain interactions.
- (2004). Requirements Management For The Automotive Extended Enterprise: The Next Evolution In Digital Product Development.
- Kerr, C.I., Roy, R. and Sackett, P.J. (2004). Designing through the supply chain - A requirements' perspective.
- (2004). Managing design changes and the implicaions for manufacturing within an automotive supplier.
- (2004). Translating Environmental legislation into the Engineering Domain.
- (2003). Development of an integrated cost model for nuclear plant decommissioning.
- (2003). PDM in the Supply Chain and the Missing Link with Customer Requirements in Automotive New product Development.
- (2003). Genetic Algorithm in Process Optimisation Problems.
- Rajpathak, D., Motta, E., Zdrahal, Z. and Roy, R. (2003). A generic library of problem solving methods for scheduling applications. K-CAP03: International Conference on Knowledge Capture 2003. doi:10.1145/945645.945663
- (2002). Application of Generalised Regression GA for Designing a Turbine Blade Cooling System.
- (2002). Variable Dependence Interaction and Multi-objective Optimisation.
- Roy, R., Rush, C.S. and Tuer, G. (2002). Cost estimating rationale capture.
- (2002). A Knowledge Model for Managing Schedule Disturbance in Steelmaking.
- (2002). Comparison of Low-Cost Response Surface Models for Rod Rolling Design Problems.
- (2002). Cost Estimating practice in Aerospace: England and Northern Ireland.
- (2002). Data and Information in Cost Estimation.
- (2002). Feeding back Designer Knowledge - A Matrix Approach.
- (2002). Knowledge in the Commercial and Engineering Activities within Cost Estimating.
- (2002). Multi-Objective Optimisation of Rolling Rod Product Design using Meta-Modelling Approach.
- (2002). The Epistemology of Scheduling Problems.
- (2002). The Integration fo Enterprise Resource Planning (ERP) and Cost Estimating (CE) Systems: The Challenges.
- (2001). Digital product development and UKSMEs: a capability assessment.
- (2001). Capturing quantative and qualitative knowledge for cost modelling within a CE environment.
- (2001). Challenges in Real-life Engineering Design Optimisation: An Analysis.
- (2001). Interaction and Multi-objective Optimisation.
- (2001). Knowledge in Cost Modelling.
- (2001). A Generic Task Ontology for Scheduling Applications.
- (2001). Interface between commercial and engineering activities in cost estimating: Industry practice.
- (2001). Qualitative and Quantitative Knowledge in Engineering System Design.
- (2000). Developing a modular approach to manufacturing engineering process modelling.
- (2000). ERP systems and knowledge management.
- (2000). Applications of Evolutionary Algorithms for Solving Real-life Design Optimisation Problems.
- (2000). Real-life Engineering Design Optimisation: Features and Techniques.
- (1999). Performance measurement systems in IT services.
- (1998). Distributed design using the internet technology.
- (1998). Reuse of machining knowledge in aircraft design.
- Roy, R., Parmee, I.C. and Purchase, G. (1996). Qualitative Evaluation of Engineering Designs Using Fuzzy Logic. ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference 18-22 August. doi:10.1115/96-detc/dac-1449
- Roy, R., Parmee, I.C. and Purchase, G. (1996). Sensitivity Analysis of Engineering Designs Using Taguchi’s Methodology. ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference 18-22 August. doi:10.1115/96-detc/dac-1455
- Shah, S., Roy, R., Tiwari, A. and Majeed, B. Customised Customer Support Using a Soft Computing Approach. International Conference on Computational Intelligence for Modelling, Control and Automation and International Conference on Intelligent Agents, Web Technologies and Internet Commerce (CIMCA-IAWTIC'06). doi:10.1109/cimca.2005.1631384
- Roy, R. and Oduguwa, V. Multiobjective optimisation of rod design in long product rolling within a quantitative and qualitative search space. 2003 IEEE International Symposium on Computational Intelligence in Robotics and Automation. doi:10.1109/cira.2003.1222246
- Oduguwa, V., Tiwari, A. and Roy, R. Handling integrated quantitative and qualitative search space in a real world optimisation problem. The 2003 Congress on Evolutionary Computation, 2003. CEC '03.. doi:10.1109/cec.2003.1299808
- Oduguwa, V. and Roy, R. Bi-level optimisation using genetic algorithm. 2002 IEEE International Conference on Artificial Intelligence Systems (ICAIS 2002). doi:10.1109/icais.2002.1048121
- Roy, R. and Williams, G. Capturing the assembly process planning rationale within an aerospace industry. 1999 IEEE International Symposium on Assembly and Task Planning (ISATP'99). doi:10.1109/isatp.1999.782978
- A framework for designing product service systems.
- Brooks, S., Yasin, A., Alatishe, K. and Roy, R. Design and Implementation of a Self-Cleaning Heat Exchanger Using a Digital Twin. doi:10.2139/ssrn.3944684
Journal articles (267)
Reports (9)
- (2011). Industrial Product-Service Systems (IPS2): Think-Tank..
- (2007). Text classification method review. Cranfield University. ISBN 978-1-86194-128-2.
- (2007). Grid computing for engineering design optimisation: Evolution and future trends. Cranfield University.
- (2006). Optimising customer support in contact centres using soft computing approach. Cranfield University. ISBN 1-86194-126-9.
- (2006). Technology selection for human behaviour modelling in contact centres. Cranfield University. ISBN 1-86194-125-0.
- (2004). A methodology for the selection of new technologies in the aviation industry. Cranfield University. ISBN 1-86194-113-7.
- (2003). Cost engineering: why, what and how? Cranfield University. ISBN 1-86194-096-3.
- (2003). Handling integrated quantitative and qualitative search space in engineering design optimisation problems. Cranfield University. ISBN 1-86194-098-X.
- (2001). The route to SUCCESS, project managers handbook..
Other (10)
- (2015). Through-life Engineering Services: Motivation, Theory, and Practice.
- (2012). Enduring and Cost-Effective Engineering Support Solutions: Proceedings of the 1st International Conference on Through-Life Engineering Services.
- Erkoyuncu, J.A., Roy, R., Datta, P., Wardle, P. and Murphy, F. (2011). Service Uncertainty and Cost for Product Service Systems.
- (2009). Industrial Product-Service Systems: Proceedings of the 1st CIRP IPS2 Conference.
- (2008). Technology Transfer.
- Tiwari, A., Vergidis, K. and Roy, R. (2007). Evolutionary Optimization of Business Process Designs.
- (2006). Applications of soft computing: Recent trends.
- (2006). Optimising customer support in contact centres using soft computing approach - Decision Engineering Report Series.
- (2005). Virtual Cost Engineering Studio (V-CES): a new service for cost engineering professionals.
- (2004). methodology for the selection of new technologies in the aerospace industry - Decision Engineering Report Series.
Professional activities
Editorial activity (2)
- Decision Engineering Book Series, Springer, Editor, 2004 – present.
- Applied Soft Computing Journal, Elsevier, Founding Editor in Chief, 2001 – 2016.
Event/conference
- CIRP General Assembly, Birmingham. (Conference) (2019). Chair.