Dr Joana Fonseca
Contact details
About
Overview
Dr Joana Fonseca graduated in Civil Engineering from the IST -Technical University of Lisbon, Portugal. Following four years of working in industry, she went to Imperial College London to resume her academic studies, obtaining an MSc in Soil Mechanics. After working at AECOM for one year, Joana returned to Imperial College to undertake her doctoral research on the micromechanics of granular media, in particular the quantification of fabric evolution of a natural sand under shearing. She subsequently became a Research Associate at Imperial College's Department of Materials investigating the micro structural response of a semi-solid carbon steel; before moving to the Laboratoire 3SR in Grenoble, France, where she researched the grain-scale mechanisms that lead to failure in sandstones. In April 2013, Joana was appointed Lecturer in Geotechnical Engineering at City and, in 2018 she was promoted to Senior Lecturer.
Dr Fonseca is Associate Editor of the Canadian Geotechnical Journal and a member of the Advisory Panel of Géotechnique.
Dr Fonseca is the Guest Editor for the Special Issue "Recent Advances in Image-Based Geotechnics" J. Imaging and Topic Editor for the article collection "Women in Built Environment" J. Frontiers in Built Environment.
Fellowships
- Chartered Member, Portuguese Institution of Engineers (Ordem dos Engenheiros)
Teaching
Teaching:
CV2401 - Soil Mechanics
CV2405 - Design & Construction
CV3401 - Geotechnical Egineering
CVM412 - Major Project
ETM462 - MEng Design Project
Research
Research expertise and interests:
Multiscale mechanics; Image-based geotechnics; Experimental geomechanics; Micro mechanisms of granular media response; Centrifuge Modelling; Localised deformation in soils, rocks and semi-solid alloys; Grain damage and breakage; Advanced techniques for characterisation of geomaterials (x-ray tomography, microscopy, image analysis and processing).
Research Awards
2016 PI Multiscale modelling of shelly carbonate sands for foundation design of offshore structures (MuMShell) EPSRC
2012 CI Developing a rational basis for dam filter stability ICE
Microstructure evolution during CPTU in silt
Using backscattered electron images of polished thin sections prepared from frozen samples, this study contributes a better understanding of the mechanisms of grain reorientation following cone penetration and drainage patterns controlling the cone resistance. Collaboration with NTNU Trondheim.
Soil fabric and morphology of sands
This pioneering study presented a statistical distribution of fabric directional data for specimens of sand at different stages of shearing deformation. It made use of x-ray tomography and image processing techniques to quantify the internal structure using (i) directional parameters as particle, contact normal, branch vector and void orientations, (ii) scalar parameters and Coordination Number and Contact Index and (iii) the operational grading of the soil and the 3D shape of the constituent grains.
Mechanisms of inelastic deformation in sandstones
This study provides new insight in the failure of cohesive geomaterials by exploring micro-structure in a “fourth dimension” - time or, in other words, deformation. Laboratory techniques were successfully developed to allow in-situ scans of the full specimen to be carried out. This investigation has revealed striking patterns of microscale deformation in sandstones with different degrees of cementation.
Behaviour of semi-solid alloys
This study exploited the synergies between metal casting and soil mechanics. The micro-structural response of a semi-solid carbon steel to loading was quantified by analysis of time-resolved synchrotron radiographs. The evidence provided of the austenite grains rearranging as quasi-rigid bodies, transmitting shear and compressive forces across grain-grain contacts and causing shear-induced dilation, supports the hypothesis that the behaviour of a semi-solid steel can be interpreted using a granular mechanics approach.
Research students
Ciaran Kennedy
Attendance: October 2018 - October 2021
Sadegh Nadimi
Attendance: 2014 - 2017
Thesis title: Multiscale modelling and characterisation of granular media
Further information: First supervisor
Deqiong Kong
Further information: Postdoctoral Researcher
Lorenzo Di Pasquale
Further information: Master student from Université Grenoble Alpes, project on investigation of particle breakage under 1D compression
Xuehui Wu
Further information: Visiting research student from Zhejiang University of Technology
Publications
Publications by category
Chapters (4)
- Li, Y.Q., Hu, Z., Fang, X. and Fonseca, J. (2015). Analysis of micro characteristics and influence factors of foundation pit failure. In Soga, K., Kumar, K., Biscontin, G. and Kuo, M. (Eds.), Geomechanics from Micro to Macro (pp. 565-570). London, UK: CRC Press. ISBN 9781138027077.
- Fonseca, J., Reyes-Aldasoro, C., O’Sullivan, C. and Coop, M. (2014). Experimental investigation into the primary fabric of stress transmitting particles. Geomechanics from Micro to Macro (pp. 1019-1024). CRC Press. ISBN 9781138027077.
- Paniagua, P., Gylland, A., Nordal, S. and Fonseca, J. (2014). Microstructural study of the deformation zones around a penetrating cone tip in silty soil. Geomechanics from Micro to Macro (pp. 1593-1598). CRC Press. ISBN 9781138027077.
- Fonseca, J., O'Sullivan, C. and Coop, M.R. (2010). Quantitative Description of Grain Contacts in a Locked Sand. In Reed, A.H. (Ed.), Advances in Computed Tomography for Geomaterials: GeoX 2010 (pp. 17-25). Wiley. ISBN 9781848211797.
Conference papers and proceedings (24)
- Beemer, R., Fonseca, J., Shaw, J., Viana da Fonseca, A. and Ferreira, C. Non-invasive characterization of particle morphology of calcareous sands from São Tomé & Príncipe. .doi:10.1051/e3sconf/202454404005
- Leonti, A., Fonseca, J., Valova, I., Beemer, R., Cannistraro, D., Pilskaln, C.... Kelly, G. (2020). Optimized 3D Segmentation Algorithm for Shelly Sand Images. The 6th World Congress on Electrical Engineering and Computer Systems and Science 13 August-.doi:10.11159/cist20.107
- Nadimi, S. and Fonseca, J. (2019). A laboratory-based technique for grain size and shape characterisation. The XVII European Conference on Soil Mechanics and Geotechnical Engineering 1-6 September, Reykjavik, Iceland.
- Fonseca, J., Riaz, A. and Barreto, D. (2019). X-ray tomography of sand-rubber mixtures. International Conference on Tomography of Materials and Structures Australia 22-26 July, Cairns, Australia.
- Fonseca, J., Nadimi, S. and Kong, D. Image-Based Modelling of Shelly Carbonate Sand for Foundation Design of Offshore Structures. .doi:10.1007/978-981-13-2306-5_5
- Nadimi, S. and Fonseca, J. (2018). Image based simulation of one-dimensional compression tests on carbonate sand. micro to MACRO Mathematical Modelling in Soil Mechanics 29 May-1 June, Calabria, Italy.
- Nadimi, S., Di Pasquale, L. and Fonseca, J. (2017). Influence of fine fraction on breakage of binary granular materials. 19th International Conference on Soil Mechanics and Geotechnical Engineering 17-22 September, Seoul, Korea.
- Fonseca, J., Sim, W.W., Shire, T. and O'Sullivan, C. (2017). Fabric analysis of internally unstable soils. 25th Meeting of the European Working Group on internal erosion in embankment dams & their foundations 4-7 September, Delft.
- Fonseca, J. and Camara, A. (2017). Using advanced statistical tools to better understand students’ expectation of teaching. HEA Annual Conference 2017 4-6 July, Manchester, UK.
- Nadimi, S. and Fonseca, J. (2017). On the torsional loading of elastoplastic spheres in contact. International Conference on Micromechanics of Granular Media 3-7 July, Montepellier, France.doi:10.1051/epjconf/201714005001
- Nadimi, S. and Fonseca, J. On the tensile strength of soil grains in Hertzian response. .doi:10.1051/epjconf/201714007001
- Nadimi, S., Kong, D. and Fonseca, J. (2017). From imaging to prediction of carbonate sand behaviour. ICTMS 2017 26-30 June, Lund, Sweden.
- Nadimi, S., Shire, T., Fonseca, J., Radjai, F., Nezamabadi, S., Luding, S.... Delenne, J.Y. Comparison between a μFE model and DEM for an assembly of spheres under triaxial compression. .doi:10.1051/epjconf/201714015002
- Nadimi, S., Divall, S., Fonseca, J., Goodey, R.J. and Taylor, R.N. (2016). An addendum for particle image velocimetry in centrifuge modelling. The 3rd European Conference on Physical Modelling in Geotechnics 1-3 June, Nantes, France.
- Nadimi, S., Fonseca, J., Barreto, D. and Taylor, R.N. (2016). A new approach to investigate the particle size effects in centrifuge modelling. The 3rd European Conference on Physical Modelling in Geotechnics 1-3 June, Nantes, France.
- Fonseca, J., Reyes-Aldasoro, C.C. and Wils, L. (2015). Three-dimensional quantification of the morphology and intragranular void ratio of a shelly carbonate sand. 6th International Symposium on Deformation Characteristics of Geomaterials 15-18 November, Buenos Aires.
- Nadimi, S., Fonseca, J., Bésuelle, P. and Viggiani, G. (2015). A microstructural finite element analysis of cement damage on Fontainebleau Sandstone. ICTMS 2015, 2nd International Conference on Tomography of Materials and Structures 29 June-3 July, Québec, Canada.
- Nadimi Sadegh, , Fonseca Joana, and Taylor Neil, A microstructure-based finite element analysis of the response of sand. .doi:10.3233/978-1-61499-601-9-816
- Fonseca, J., Karatza, Z., Bésuelle, P. and Viggiani, G. (2014). An experimental investigation on the deformation of Fontainebleau sandstone. 16th International Conference on Experimental Mechanics 7 January, Cambridge, UK.
- Fonseca, J., Besuelle, P. and Viggiani, G. (2013). An experimental study of micro-scale deformation in a soft sandstone. Proceedings of the 1st International Conference on Tomography of Materials and Structures (ICTMS2013) 1 July-, Ghent, Belgium.
- Fonseca, J., Besuelle, P. and Viggiani, G. (2013). Microstructure evolution on sandstones with different degrees of cementation. Proceedings of the Workshop on Experimental Micromechanics for Geomaterials (ISSMGE TC101-TC105) 23 May-, Hong-Kong.
- O'Sullivan, C., Cavarretta, I., Fonseca, J. and Altuhafi, F. (2013). Quantitative Evaluation of Particle Morphology. Proceedings of the Workshop on Experimental Micromechanics for Geomaterials (ISSMGE TC101-TC105) 23 May-, Hong-Kong.
- Fonseca, J., O'Sullivan, C., Coop, M., O'Sullivan, C. and Coop, M.R. (2009). Image segmentation techniques for granular materials. Proceedings of the 6th International Conference on Micromechanics of Granular Media 13 July-, Golden,Colorado, USA.doi:10.1063/1.3179898
- Fonseca, J., O'Sullivan, C., Burns, S., Mayne, P. and Santamarina, C. (2008). A re-evaluation of the Fourier descriptor approach to quantifying sand particle geometry. Proceedings of the 4th International Symposium on Deformation Characteristics of Geomaterials 22 September-, Atlanta, Georgia, USA.
Journal articles (26)
- Ma, Z., Zhang, H., Li, M., Yuan, Y., Li, Y., Ji, Y.... Zhang, H. (2026). In-situ synchrotron X-ray imaging and quantitative analysis of grain dynamics in semi-solid metal under shear flow. Scripta Materialia, 283, pp. 117423-117423. doi:10.1016/j.scriptamat.2026.117423
- Beemer, R.D., Li, L., Leonti, A., Shaw, J., Fonseca, J., Valova, I.... Pilskaln, C.H. (2022). Comparison of 2D Optical Imaging and 3D Microtomography Shape Measurements of a Coastal Bioclastic Calcareous Sand. Journal of Imaging, 8(3), pp. 72-72. doi:10.3390/jimaging8030072
- Ivanik, O., Fonseca, J., Shabatura, O., Khomenko, R., Hadiatska, K. and Kravchenko, D. (2022). An integrated approach for landslide hazard assessment: A case study of the Middle Dnieper Basin, Ukraine. Journal of Water and Land Development pp. 81-86. doi:10.24425/jwld.2021.139947
- Ma, Z., Zhang, H., Fu, H., Fonseca, J., Yang, Y., Du, M.... Zhang, H. (2022). Modelling flow-induced microstructural segregation in semi-solid metals. Materials & Design, 213, pp. 110364-110364. doi:10.1016/j.matdes.2021.110364
- Fonseca, J. (2020). Editorial. Environmental Geotechnics, 7(8), pp. 522-523. doi:10.1680/jenge.2020.7.8.522
- Nadimi, S., Fonseca, J., Andò, E. and Viggiani, G. (2020). A micro finite-element model for soil behaviour: experimental evaluation for sand under triaxial compression. Géotechnique, 70(10), pp. 931-936. doi:10.1680/jgeot.18.t.030
- Kong, D. and Fonseca, J. (2019). On the kinematics of shelly carbonate sand using X-ray micro tomography. Engineering Geology, 261, pp. 105268-105268. doi:10.1016/j.enggeo.2019.105268
- Nadimi, S., Otsubo, M., Fonseca, J. and O’Sullivan, C. (2019). Numerical modelling of rough particle contacts subject to normal and tangential loading. Granular Matter, 21(4). doi:10.1007/s10035-019-0970-y
- Fonseca, J., Riaz, A., Bernal-Sanchez, J., Barreto, D., McDougall, J., Miranda-Manzanares, M.... Dimitriadi, V. (2019). Particle–scale interactions and energy dissipation mechanisms in sand–rubber mixtures. Géotechnique Letters. doi:10.1680/jgele.18.00221
- Nadimi, S. and Fonseca, J. (2019). Image based simulation of one-dimensional compression tests on carbonate sand. Meccanica, 54(4-5), pp. 697-706. doi:10.1007/s11012-018-0923-2
- Nadimi, S. and Fonseca, J. (2018). A micro finite-element model for soil behaviour: numerical validation. Géotechnique, 68(4), pp. 364-369. doi:10.1680/jgeot.16.p.163
- Kong, D. and Fonseca, J. (2018). Quantification of the morphology of shelly carbonate sands using 3D images. Géotechnique, 68(3), pp. 249-261. doi:10.1680/jgeot.16.p.278
- Paniagua, P., Fonseca, J., Gylland, A. and Nordal, S. (2018). Investigation of the change in soil fabric during cone penetration in silt using 2D measurements. Acta Geotechnica, 13(1), pp. 135-148. doi:10.1007/s11440-017-0559-8
- Nadimi, S. and Fonseca, J. (2017). Single-Grain Virtualization for Contact Behavior Analysis on Sand. Journal of Geotechnical and Geoenvironmental Engineering, 143(9). doi:10.1061/(asce)gt.1943-5606.0001740
- Nadimi, S. and Fonseca, J. (2017). A micro finite-element model for soil behaviour. Géotechnique, 68(4), pp. 290-302. doi:10.1680/jgeot.16.P.147
- Nadimi, S. and Fonseca, J. (2016). Enhancing soil sample preparation by thermal cycling. Géotechnique, 66(11), pp. 953-958. doi:10.1680/jgeot.15.t.033
- Fonseca, J., Nadimi, S., Reyes-Aldasoro, C.C., O׳Sullivan, C. and Coop, M.R. (2016). Image-based investigation into the primary fabric of stress-transmitting particles in sand. Soils and Foundations, 56(5), pp. 818-834. doi:10.1016/j.sandf.2016.08.007
- Paniagua, P., Fonseca, J., Gylland, A.S. and Nordal, S. (2015). Microstructural study of deformation zones during cone penetration in silt at variable penetration rates. Canadian Geotechnical Journal, 52(12), pp. 2088-2098. doi:10.1139/cgj-2014-0498
- Fonseca, J., Sim, W., Shire, T. and O'Sullivan, C. (2015). Microstructural analysis of sands with varying degrees of internal stability. Géotechnique, 64(5), pp. 405-411. doi:10.1680/geot.13.T.014
- Li, Y., Hu, Z., Weng, T., Fonseca, J. and Zhang, X. (2014). Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater. Engineering Geology, 183, pp. 247-253. doi:10.1016/j.enggeo.2014.08.020
- Gourlay, C.M., O’Sullivan, C., Fonseca, J., Yuan, L., Kareh, K.M., Nagira, T.... Yasuda, H. (2014). Synchrotron Radiography Studies of Shear-Induced Dilation in Semisolid Al Alloys and Steels. JOM, 66(8), pp. 1415-1424. doi:10.1007/s11837-014-1029-5
- Fonseca, J., O’Sullivan, C., Nagira, T., Yasuda, H. and Gourlay, C.M. (2013). In situ study of granular micromechanics in semi-solid carbon steels. Acta Materialia, 61(11), pp. 4169-4179. doi:10.1016/j.actamat.2013.03.043
- Fonseca, J., O'Sullivan, C., Coop, M.R. and Lee, P.D. (2013). Quantifying the evolution of soil fabric during shearing using directional parameters. Geotechnique, 63(6), pp. 487-499. doi:10.1680/geot.12.P.003
- Fonseca, J., O'Sullivan, C., Coop, M.R. and Lee, P.D. (2013). Quantifying the evolution of soil fabric during shearing using scalar parameters. Géotechnique, 63(10), pp. 818-829. doi:10.1680/geot.11.P.150
- Fonseca, J., Bésuelle, P. and Viggiani, G. (2013). Micromechanisms of inelastic deformation in sandstones: An insight using x-ray micro-tomography. Geotechnique Letters, 3(April-June), pp. 78-83. doi:10.1680/geolett.13.034
- Fonseca, J., O'Sullivan, C., Coop, M.R. and Lee, P.D. (2012). Non-invasive characterization of particle morphology of natural sands. Soils and Foundations, 52(4), pp. 712-722. doi:10.1016/j.sandf.2012.07.011
Thesis/dissertation
- Fonseca, J. The evolution of morphology and fabric of a sand during shearing. (PhD)
Professional activities
Editorial activity (2)
- Canadian Geotechnical Journal, Associate Editor.
- Geotechnique, Advisory Panel.
Events/conferences (4)
-
7th International Symposium on Deformation Characteristics of Geomaterials (the IS-Glasgow2019). (Conference) (2019).
Description: Technical Committee -
15th GM3 Geo-mechanics: From Micro to Macro travelling workshop. (Workshop) City, University of London, UK (2017).
Description: Organiser -
The International Symposium on Geomechanics from Micro to Macro (IS-Cambridge 2014). Cambridge, UK (2014).
Description: Organising committee -
IS-Atlanta 2018 Geo-Mechanics from Micro to Macro in Research and Practice - ISSMGE TC 105 Symposium.
Description: International Advisory Committee
Media appearances (5)
- “Through engineering, we have the chance to change the world we live in.” Academics and alumna share. http://www.city.ac.uk/news/2015/june/through-engineering-we-have-the-chance-to-change-the-world-we-live-in
- https://www.youtube.com/watch?v=jYlYcD-XP9E.
- https://issuu.com/cityuniversitylondon/docs/city_news_issue_17
- How we are changing the world. http://www.city.ac.uk/start-here/how-we-are-changing-the-world
- Reaching for the skies. https://www.city.ac.uk/news/2016/june/reaching-for-the-skies
Other
- EPSRC Full College membership .